Three-Phase Brushless Motor Driver
www.DataSheet.co.kr
Ordering number : EN7109A
Monolithic Digital IC
LB11826
Overview
For OA Products
Three-Phase Br...
Description
www.DataSheet.co.kr
Ordering number : EN7109A
Monolithic Digital IC
LB11826
Overview
For OA Products
Three-Phase Brushless Motor Driver
The LB11826 is a three-phase brushless motor driver that is optimal for driving drum and paper feed motors in laser printers and plain paper copiers. This IC adopts a direct PWM drive technique for minimal power loss. Flexible control of motor speed in response to an externally provided clock frequency (corresponding to the FG frequency) can be implemented by using the LB11826 in conjunction with the Sanyo LB11825M.
Features
Three-phase bipolar drive (30V, 2.5V) Direct PWM drive Built-in low side inductive kickback absorbing diode Speed discriminator + PLL speed control Speed locked state detection output Built-in forward/reverse switching circuit Full complement of built-in protection circuits, including current limiter circuit, thermal protection circuit, and motor constraint protection circuit.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter Supply voltage Output current Allowable power dissipation Symbol VCC max IO max Pd max1 Pd max2 Operating temperature Storage temperature Topr Tstg T ≤ 500ms Independent IC When infinitely large heat sink Conditions Ratings 30 2.5 3 20 -20 to +80 -55 to +150 Unit V A W W °C °C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home applian...
Similar Datasheet