LV5061V

www.DataSheet.co.kr Ordering number : ENA1829A Bi-CMOS IC LV5061V Overview Low power consumption and high efficiency Step-down Switching Regulator Controller LV5061V is 1ch step-down switching regulator. The operation current is about 90μA, and low power consumption is achieved. Functions 1ch SBD rectification controller IC Maximum value of light load mode current is 90μA. Built-in OCP circuit with P-by-P method When P-by-P is generated continuously, it shifts to the HICCUP operation. If connect C-HICCUP to GND pin, then latch-off when over current. The oscillatory frequency can be set by the external pin. The oscillatory frequency is 300 kHz to 2.2MHz Built-in UVLO, TSD Specifications Parameter Input voltage Allowable pin voltage Maximum Ratings at Ta = 25°C Symbol VIN max PDR,HDRV,RSNS, ILIM,EN,PG VIN-PDR REF SS,FB,COMP, C-HICCUP,RT Allowable power dissipation Operating temperature Storage temperature Pd max Topr Tstg Specified substrate *1 0.74 -40 to +85 -55 to +150 W ˚C ˚C 6 6 REF V V V Conditions Ratings 22 VIN Unit V V *1: Specified substrate 114.3mm×76.1mm×1.6mm3 glass-epoxy Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medic...