LV8411GR

www.DataSheet.co.kr Ordering number : ENA1250 Bi-CMOS LSI LV8411GR Overview For DSC, and Cell Phone Camera Modules 4-channel Single-chip Motor Driver IC The LV8411GR is an H bridge motor driver IC and is able to control 4 modes of forward, reverse, brake, and standby. This IC housed in a miniature package is optimum for use in a stepping motor driving system for DSC or a camera module of cell phones. Features Saturation drive H bridge: 4 channels Built-in thermal protection circuit Built-in low voltage malfunction prevention circuit Incorporates a transistor for driving photosensors Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Power supply voltage 1 Power supply voltage 2 Output peak current Output continuous current 1 Output continuous current 2 Allowable power dissipation Operating temperature Storage temperature Symbol VM max VCC max IO peak IO max1 IO max2 Pd max Topr Tstg Channels 1 to 4, t ≤ 10msec, ON-duty ≤ 20% Channels 1 to 4 PI1 Mounted on a circuit board* Conditions Ratings 6.0 6.0 600 400 30 1.05 -30 to +85 -55 to +150 Unit V V mA mA mA W °C °C * Specified circuit board : 40mm×50mm×0.8mm : glass epoxy four-layer board Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall no...