LV8761V

www.DataSheet.co.kr Ordering number : ENA1172A LV8761V Overview Bi-CMOS LSI Forward/Reverse H-bridge Driver The LV8761V is an H-bridge driver that can control four operation modes (forward, reverse, brake, and standby) of a motor. The low on-resistance, zero standby current, highly efficnet IC is optimal for use in driving brushed DC motors for office equipment. Features Forward/reverse H-bridge motor driver: 1 channel Built-in current limiter circuit Built-in thermal protection circuit Built-in short-circuit protection function Unusual condition warning output pin Short-circuit protection circuit selectable from latch-type or auto reset-type Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Supply voltage Symbol VM max VCC max Output peak current Output continuous current Logic input voltage Allowable power dissipation Operating temperature Storage temperature IO peak IO max VIN Pd max Topr Tstg Mounted on a specified board. * tw ≤ 20ms, duty 5% Conditions Ratings 38 6 4 3 -0.3 to VCC+0.3 3.15 -20 to +85 -55 to +150 Unit V V A A V W °C °C * Specified circuit board : 90mm×90mm×1.6mm, glass epoxy 2-layer board (2S0P), with backside mounting. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein...