LV8762T

www.DataSheet.co.kr Ordering number : ENA1926 LV8762T Overview Bi-CMOS LSI Forward/Reverse H-bridge Driver The LV8762T is an 1ch H-bridge driver that can control four operation modes (forward, reverse, brake, and standby) of a motor. The IC is optimal for use in driving brushed DC motors for office equipment. Features Forward/reverse H-bridge motor driver: 1 channel IOmax = 1A Built-in current limiter Current limit mask function Built-in thermal protection circuit Alert signal output Single power supply Built-in short-circuit protection function (selectable from latch-type or auto reset-type). Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Supply voltage Output peak current Output continuous current Logic input voltage EMO pin input voltage Allowable power dissipation Operating temperature Storage temperature Symbol VM max IO peak IO max VIN max VEMO Pd max Topr Tstg Mounted on a specified board. * tw ≤ 10ms, duty 20% Conditions Ratings 36 1.5 1.0 -0.3 to +6 -0.3 to +6 1.4 -20 to +85 -55 to +150 Unit V A A V V W °C °C * Specified circuit board : 57mm×57mm×1.6mm, glass epoxy both-type board. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "spec...