STK672-050-E

www.DataSheet.co.kr Ordering number : EN5228D Thick-Film Hybrid IC STK672-050-E Overview Unipolar Constant-current Chopper (external excitation PWM) Circuit with Built-in Microstepping Controller Stepping Motor Driver (sine wave drive) Output Current 3.0A (no heat sink*) The STK672-050-E is a stepping motor driver hybrid IC that uses power MOSFETs in the output stage. It includes a builtin microstepping controller and is based on a unipolar constant-current PWM system. The STK672-050-E supports application simplification and standardization by providing a built-in 4 phase distribution stepping motor controller. It supports five excitation methods: 2 phase, 1-2 phase, W1-2 phase, 2W1-2 phase, and 4W1-2 phase excitations, and can provide control of the basic stepping angle of the stepping motor divided into 1/16 step units. It also allows the motor speed to be controlled with only a clock signal. The use of this hybrid IC allows designers to implement systems that provide high motor torques, low vibration levels, low noise, fast response, and high-efficiency drive. Applications Facsimile stepping motor drive (send and receive) Paper feed and optical system stepping motor drive in copiers Laser printer drum drive Printer carriage stepping motor drive X-Y plotter pen drive Other stepping motor applications Note*: Conditions: VCC1 = 24V, IOH = 2.0A, 2W1-2 excitation mode. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with...