SiGe:C Low Noise Amplifier MMIC
;621
BGU7008
SiGe:C Low Noise Amplifier MMIC for GPS, GLONASS, Galileo and Compass
Rev. 4 — 18 January 2017
Product...
Description
;621
BGU7008
SiGe:C Low Noise Amplifier MMIC for GPS, GLONASS, Galileo and Compass
Rev. 4 — 18 January 2017
Product data sheet
1. Product profile
1.1 General description
The BGU7008 is, also known as the GPS1104M, an AEC-Q100 qualified Low Noise Amplifier (LNA) for GNSS receiver applications in a plastic leadless 6-pin, extremely small SOT886 package. The BGU7008 requires only one external matching inductor and one external decoupling capacitor.
The BGU7008 adapts itself to the changing environment resulting from co-habitation of different radio systems in modern cellular handsets. It has been designed for low power consumption and optimal performance when jamming signals from co-existing cellular transmitters are present. At low jamming power levels it delivers 18.5 dB gain at a noise figure of 0.85 dB. During high jamming power levels, resulting for example from a cellular transmit burst, it temporarily increases its bias current to improve sensitivity.
1.2 Features and benefits
AEC-Q100 qualified (see Section 9.1) Covers full GNSS L1 band, from 1559 MHz to 1610 MHz Noise figure (NF) = 0.85 dB and gain (Gp) = 18.5 dB High input 1 dB compression point Pi(1dB) of 12 dBm High out of band IP3i of 4 dBm Supply voltage 1.5 V to 2.85 V Power-down mode current consumption < 1 A Optimized performance at low supply current of 4.8 mA Integrated temperature stabilized bias for easy design Requires only one input matching inductor and one supply decoupling ca...
Similar Datasheet