Document
www.DataSheet.co.kr
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications
K Momentary pushbuttons for thick panels K Illuminated or non-illuminated K Tactile feedback K Flat round actuator for optional marking K Sealed to IP67
ENVIRONMENTAL SPECIFICATIONS
MATERIALS
• Front panel sealing : IP67 according to IEC 60529 • Shock resistance : 100 g according to IEC 512-4, test 6c • Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d • Salt spray : IEC 512-6, test 11f • Operating temperature : -40°C to +85°C
ELECTRICAL SPECIFICATIONS
• Case : thermoplastic UL94-V0 • Actuator : polyamide 6/6 • Bushing/bezel : polyamide 6/6 • Contacts : brass, gold plated • Terminal seal : epoxy
• Max. current/voltage rating with resistive load : 50mA 12VDC • Initial contact resistance : 50 mΩ max. • Insulation resistance : 1 GΩ min. at 500VDC • Dielectric strength : 1.000 Vrms • Electrical life at full load : 500.000 cycles
GENERAL SPECIFICATIONS
• Panel thickness : 1,50 mm (.059) min. - 10 mm (.393) max. • Total travel : 1,7 mm (.067) +/- 0,3 mm • Typical operating force : 4N +/- 2N • Mechanical life : 1.000.000 cycles • Torque : 1 Nm max. applied to nut • Soldering : 300°C max. for 3 seconds
MOUNTING
Panel cut-out
Matrix mounting
Back of panel space requirement
Flat seal
APEM
www.apem.com
1
Datasheet pdf - http://www.DataSheet4U.net/
www.DataSheet.co.kr
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Overview
IL
SERIES
Actuator shape
R P Round, curved Round, flat 3
Electrical function
Normally open (NO) F P S
Terminals
Flying leads Straight PC Solder lugs
Contacts
CD Brass, gold plated
Actuator colour
1 2 3 4 5 6 7/1 8 9 B M Blue Black Green Grey Yellow Red White Bright chrome Orange Dark blue Brown Blank L0S L0Y L0G L0B L0W
LED colour
Non-illum. Super red Yellow Green Blue White
Options
X1242 Custom switch, mounted from the front 234 Custom switch, bushing Ø 15 (.590)
: itches w s stom ies. act cuof the ser p m o C nd see e
ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches and options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information.
Mounting accessories : Standard hardware supplied : 1 flat seal and 1 hex nut 14 mm (.551) across flats. Hex nut part number U166. Packaging unit : 25 pieces
2
www.apem.com
APEM
Datasheet pdf - http://www.DataSheet4U.net/
www.DataSheet.co.kr
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Illuminated
• Curved or flat actuator • Antirotation bushing
Straight P
5.20 (.204) 4.55 (.179)
1.00 (.039)
MODEL STRUCTURE
CIPCOSP
Actuator marking available on ILP models (symbol 10 mm max.). On request.
Solder lug terminals
© Flat
Curved actuator ILR3SCD Flat actuator ILP3SCD
Normally open
Normally open
Also available with straight PC terminals : IL•3PAD
Flying lead terminals
© Flat
Curved actuator ILR3FCD Flat actuator ILP3FCD
Normally open
Normally open
ACTUATOR COLOUR
1 : blue - 2 : black - 3 : green - 4 : grey - 5 : yellow - 6 : red - 7/1 : white - 8 : bright chrome 9 : orange - B : dark blue - M : brown
LED COLOUR
L0S : red - L0Y : yellow - L0G : green - L0B : blue - L0W : white
APEM
www.apem.com
3
Datasheet pdf - http://www.DataSheet4U.net/
8.70 (.342)
C
www.DataSheet.co.kr
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Non-illuminated
• Curved or flat actuator • Antirotation bushing
Straight P
5.20 (.204) 4.55 (.179)
1.00 (.039)
MODEL STRUCTURE
CIPCOSP
Actuator marking available on ILP models (symbol 10 mm max.). On request.
Solder lug terminals
© Flat
Curved actuator ILR3SCD Flat actuator ILP3SCD
Normally open
Normally open
Also available with straight PC terminals : IL•3PAD
Flying lead terminals
© Flat
Curved actuator ILR3FCD Flat actuator ILP3FCD
Normally open
Normally open
ACTUATOR COLOUR
1 : blue - 2 : black - 3 : green - 4 : grey - 5 : yellow - 6 : red - 7/1 : white - 8 : bright chrome 9 : orange - B : dark blue - M : brown
4
www.apem.com
APEM
Datasheet pdf - http://www.DataSheet4U.net/
8.70 (.342)
C
www.DataSheet.co.kr
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Custom switches Custom switch for compact matrix mounting
• Mounting from the front into a threaded panel cut-out • Matrix mounting : 16 x 16 mm (.630x.630) • Illuminated or non-illuminated • Same terminal options and colours as standard models • Part numbers on request.
ILP3FCD...X1242
Custom switch for compact matrix mounting
• Standard panel mounting • Bushing Ø 15 mm (.590) • Matrix mounting : 18 x 18 mm (.708x.708) • Illuminated or non-il.