Document
10W DC-DC Regulated Single Output Converter
Features :
SKE10
series
2:1 wide input range 4:1 wide input range(option) 1000VDC I/O isolation 3000VDC I/O isolation(option) Built-in EMI filter Protections: Short circuit / Overload Cooling by free air convection Six-sided shield metal case 100% burn-in test Low cost / High reliability Approvals: FCC / CE 2 years warranty
SPECIFICATION
ORDER NO. DC VOLTAGE CURRENT RANGE SKE10A- SKE10B- SKE10C- SKE10A- SKE10B- SKE10C- SKE10A- SKE10B- SKE10C- SKE10A- SKE10B- SKE10C05 05 05 12 12 15 15 15 24 24 24 12 5V 200 ~ 2000mA 12V 84 ~ 840mA 60mVp-p 15V 66.6 ~ 666mA 60mVp-p 24V 42 ~ 420mA 80mVp-p
OUTPUT
RATED POWER 10W RIPPLE & NOISE (max.) Note.2 50mVp-p LINE REGULATION Note.3 0.3% LOAD REGULATION VOLTAGE ACCURACY SWITCHING FREQUENCY VOLTAGE RANGE EFFICIENCY (Typ.)
Note.4
0.5% 2.0% 200KHz min. A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC 78% 80% 81% 79% 79% Full load No load Pi network Fuse recommended 160% ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +71 (Refer to output load derating curve) A: 1100mA B: 530mA A: 28mA B: 16mA C: 270mA C: 8mA 81% 80% 82% 82% 81% 82% 83%
INPUT
DC CURRENT FILTER PROTECTION OVER CURRENT
PROTECTION
(Note. 5)
SHORT CIRCUIT WORKING TEMP.
20% ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -25 ~ +105 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) TEMP. COEFFICIENT 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION EMC www.DataSheet4U.com EMS IMMUNITY MTBF OTHERS DIMENSION WEIGHT I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25 ) 50.8*25.4*11.2mm or 2"*1"*0.44" inch (L*W*H) 32g
Mechanical Specification
Unit:mm
50.8 15.3 20.3 3 4 5 15.2
2.5
Pin Configuration
Pin no.
1 2 3 4 5
5.8
-25
Derating Curve
11.27
Output Single
+ Vi n - Vi n + Vo u t No Pin - Vo u t
100
10.2 5.1 10.1
LOAD (%)
25.4
1 2
1.0
+ 0.2/-0.1
2.5
BOTTOM VIEW
10.2 10.2
80
0
25
50 60 71
100
Ta (
NOTE
1.All parameters are specified at normal input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
)
File Name:SKE10-SPEC 2008-05-20
.
Similar Datasheet