www.DataSheet.co.kr
data sheet
SKY13316-12LF: GaAs IC SPST Non-Reflective Switch 300 kHz–2.5 GHz
Features
igh isolation (50 dB @ 900 MHz) H J1 reflective (open) in isolation state l J2 non-reflective in isolation state l Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020
l l
Functional Block Diagram
J1
J2
V1
Description
The SKY13316-12LF is a non-reflective SPST switch designed for low cost, low power commercial applications. It is ideal for use as a building block for high isolation multi-throw switches.
V2
NEW
Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging.
GND
Electrical Specifications
Vctl = 0 V/-5 V, T = 25 °C, Pinput = 0 dBm, Z0 = 50 W, unless otherwise noted
Parameter Insertion loss Frequency 300 kHz–0.5 GHz 300 kHz–1.0 GHz 300 kHz–2.5 GHz 300 kHz–0.5 GHz 300 kHz–1.0 GHz 300 kHz–2.5 GHz 300 kHz–0.5 GHz 300 kHz–1.0 GHz 300 kHz–2.5 GHz 300 kHz–0.5 GHz 300 kHz–1.0 GHz 300 kHz–2.5 GHz Min. Typ. 0.5 0.6 0.75 59 48 30 21 16 13 22 18 11.5 Max. 0.9 1.0 1.2 Unit dB dB dB dB dB dB dB dB dB dB dB dB
Isolation
Return loss
Return loss J2 port (ISO state)
53.0 45.0 29.5 15.8 12.7 10.9 15.8 12.7 10.1
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 •
[email protected] • www.skyworksinc.com
200933 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 20, 2008
1
Datasheet pdf - http://www.DataSheet4U.net/
www.DataSheet.co.kr
Data Sheet • SKY13316-12LF
Operating Characteristics
Vctl = 0 V/-5 V, T = 25 °C, Pinput = 0 dBm, Z0 = 50 W, unless otherwise noted
Parameter Switching Characteristics Condition 10% RF envelope to 90% RF envelope 90% RF envelope to 10% RF envelope 50% VCTL to 90% RF envelope 50% VCTL to 10% RF envelope Video feed-through Input power for 1dB compression Intermodulation intercept point (IP3) Control voltages Control currents Two tone input power = 13 dBm per tone 1 MHz spacing Vctl Low Vctl High Vctl Low, Vctl High 0.05 GHz 0.5 GHz–2 GHz 0.05 GHz 0.5 GHz–2 GHz -3 5 Frequency Min. Typ. 5 15 40 16 24 35 46 0 -5 20 Max. Unit ns ns mV dBm dBm dBm dBm V V µA
1. Switching characteristics will vary with value chosen for Cbp. -0.2
Typical Performance Data (0, -5 V)
Z0 = 50 W, unless otherwise noted
0.0 -0.1 -0.2 -40 °C +25 °C +85 °C 0.0 -5.0 -40 °C +25 °C +85 °C
Insertion Loss (dB)
-0.4 -0.5 -0.6 -0.7 -0.8 -0.9 -1.0 0 0.5 1.0 1.5 2.0 2.5 3.0
Return Loss (dB)
-0.3
-10.0 -15.0 -20.0 -25.0 -30.0 -35.0 0 0.5 1 1.5 2 2.5 3
Frequency (GHz)
Frequency (GHz)
typical Insertion Loss
-40 °C +25 °C +85 °C
typical J1 Return Loss (Insertion Loss State)
-40 °C +25 °C +85 °C
0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60 -65 -70 -75 -80 0
0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50
Return Loss (dB)
Isolation (dB)
0.5
1.0
1.5
2.0
2.5
3.0
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
Frequency (GHz)
typical Isolation
typical J2 Return Loss (Isolation State)
2
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 •
[email protected] • www.skyworksinc.com
October 20, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200933 Rev. B
Datasheet pdf - http://www.DataSheet4U.net/
www.DataSheet.co.kr
Data Sheet • SKY13316-12LF
Absolute Maximum Ratings
Characteristic Value 30 dBm > 500 MHz 0/-5 V 27 dBm at 50 MHz 0/-5 V +0.2 V, -8 V -40 °C to +85 °C -65 °C to +150 °C RF input power Control voltage Operating temperature Storage temperature
Pin Out
GND V1 V2 GND J1 GND GND J2
1
50
8
2 3
7 6
Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty.
4
5
CAUTION: A lthough this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times.
Pin Descriptions
Pin Number 1 2 3 4 5 6 Pin Name GND V1 V2 GND J2 GND GND J1 Description Ground DC control voltage DC control voltage Ground RF port Ground Ground RF port
Truth Table
V1 -5 0 V2 0 -5 Isolation J1–J2 Insertion loss
7 8
Any state other than described in the truth table will put the switch in an undefined state.
Package Outline
Pin 8
0.050 (1.27 mm) BSC
Pin 1 Indicator
0.244 (6.20 mm) 0.228 (5.80 mm)
Pin 1 0.068 (1.73 mm) Max.
0.020 (0.51 mm) Max. 0.049 (1.24 mm) 0.016 (0.41 mm) 0.016 Max. (0.41 mm) x 45˚ Chamfer 8˚ Max.
0.197 (5.00 mm) 0.189 (4.80 mm) 0.010 (0.25 mm) 0.004 (0.10 mm)
0.158 (4.00 mm) 0.1.