35SVPD22M

www.DataSheet.co.kr 4. SPECIFICATIONS FOR EACH SERIES Conductive polymer type SVPD Series Guaranteed at 125°C, 85°C 85% guaranteed,Rated 35V, Rated 35V max. The SVQP series guaranteed 125°C This product is very reliable, guaranteeing 85°C 85% performance. Suitable for use in smoothing circuits of vehiclemounted equipment, industrial equipment, etc. This product can support lead free-reflow.( 2). Specifications Items Category temperature range Tolerance on rated capacitance Tangent of loss angle Leakage current 1 ESR Characteristics of impedance ratio at high temp. and low temp. Conditions Marking : Polarity( ), Rated voltage, (Purple) SVPD Rated capacitance, Lot.No. Characteristics -55°C to +125°C M : ±20% 120Hz Less than or equal to the value of Table2 120Hz Less than or equal to the value of Table2 After 2 minutes Less than or equal to the value of Table2 Z / Z 20°C 0.75 to 1.25 Based the value at -55°C 0.75 to 1.25 Z / Z 20°C 100KHz +20°C +125°C Within ±20% ∆C/C 2 times or less than an initial standard 125°C, 2,000h, Rated tanδ Endurance 2 times or less than an initial standard voltage applied ESR Leakage current Below an initial standard Within ±20% ∆C/C 85°C, 85 to 90% RH, 2 times or less than an initial standard tanδ Damp heat (Steady state) 1,000h, 2 times or less than an initial standard ESR Rated voltage applied Leakage current Below an initial standard Within ±10% ∆C/C Resistance to 1.3 times or less than an initial standard tan δ 2 (VPS) (230°C X 75s) solde...