(ADN4690E - ADN4695E) High Speed M-LVDS Transceivers
3.3 V, 100 Mbps, Half- and Full-Duplex, High Speed M-LVDS Transceivers
Data Sheet
FEATURES
Multipoint LVDS transceivers ...
Description
3.3 V, 100 Mbps, Half- and Full-Duplex, High Speed M-LVDS Transceivers
Data Sheet
FEATURES
Multipoint LVDS transceivers (low voltage differential signaling driver and receiver pairs) Switching rate: 100 Mbps (50 MHz) Supported bus loads: 30 Ω to 55 Ω Choice of 2 receiver types Type 1 (ADN4690E/ADN4692E): hysteresis of 25 mV Type 2 (ADN4694E/ADN4695E): threshold offset of 100 mV for open-circuit and bus-idle fail-safe Conforms to TIA/EIA-899 standard for M-LVDS Glitch-free power-up/power-down on M-LVDS bus Controlled transition times on driver output Common-mode range: −1 V to +3.4 V, allowing communication with 2 V of ground noise Driver outputs high-Z when disabled or powered off Enhanced ESD protection on bus pins ±15 kV HBM (human body model), air discharge ±8 kV HBM (human body model), contact discharge ±10 kV IEC 61000-4-2, air discharge ±8 kV IEC 61000-4-2, contact discharge Operating temperature range: −40°C to +85°C Available in 8-lead (ADN4690E/ADN4694E) and 14-lead (ADN4692E/ADN4695E) SOIC packages
www.DataSheet.co.kr
ADN4690E/ADN4692E/ADN4694E/ADN4695E
FUNCTIONAL BLOCK DIAGRAMS
VCC
ADN4690E/ ADN4694E
RO RE DE DI D
10471-001
R A B
GND
Figure 1.
VCC
ADN4692E/ ADN4695E
RO RE DE DI D Z
10471-102
R
A B
Y
GND
Figure 2.
APPLICATIONS
Backplane and cable multipoint data transmission Multipoint clock distribution Low power, high speed alternative to shorter RS-485 links Networking and wireless base station infrastructure
GENERAL DESCRIPTION
The ADN4690E/ADN4692...
Similar Datasheet