JMB356

JMicron/JMB356 JMB356 eSATA+1394A/B + USB20 to Dual SATA Host Adapter Description The JMB356 is single chip solution to bridge between USB 2.0 host or 1394 host and SATA device. The highly integrated USB 2.0, 1394A/B and SATA Phys technology provides a cost-effective solution to apply SATA to SATA device or USB to SATA device or 1394 to SATA device enclosure. The USB adheres to the Mass Storage Class Bulk-Only Transport Specification. The embedded command parser supports both ATA and ATAPI command set with LBA48 bit addressing capability. The 1394 adheres to SBP-2 specification. And SBP-2 acceleration hardware is embedded to off-load CPU and easy firmware control. Features Compliance with Gen1i/Gen1m of Serial ATA II Electrical Specification 2.6 Support SATA II Asynchronous Signal Recovery (Hot Plug) feature Compliance with USB 2.0 electrical specification Support USB High-Speed and Full-Speed Operation Compliance with USB Mass Storage Class, Bulk-Only Transport Specification Support Asynchronous Transfers at 100/200 and 400 Mb/s for 1394a www.DataSheet.co.kr Support 1394A/B SBP-2 Acceleration Feature to optimize performance Compliance with IEEE Std 1394-1995, IEEE 1394a-2000 and IEEE 1394b-2002 Specifications Support ATA/ATAPI PACKET command set Support ATA/ATAPI LBA48 addressing mode Supports Dual LUN for USB/1394/eSATA Supports Hardware RAID for RAID0 (striping) and RAID1 (mirror) over USB/1394/eSATA Supports AES-128/256 for data encryption over USB/1394/eSATA (S versio...