JMF601

JMF601 JMF601 SATA II to Flash Controller Overview JMF601 is a single chip with Serial ATA Gen II and USB 2.0 combo to NAND flash interface. It is an innovative design to provide high bandwidth for flash memory access. JMF601 can support the maximum read and write speed to drive the limit of flash memory. It supports up to 64 NAND Flash chips. JMF601 is available in 130 pin TFBGA (9mm x 9 mm) package. JMF601 supports a variety of popular NAND flash memory, including Toshiba, Samung, Hynix/ST and Intel/Micron Flash. With the embedded hardware error correction engines and the robust bad block management technology, JMF601 is suitable for PC and industrial solid state drive applications. In addition, dynamic and whole drive static wear leveling are used in JMF601 to provide the best extension of drive life time. JMicron also provides reference designs in different drive form factors, mass production tool and firmware update tool to help customers go on mass product quickly. Feature www.DataSheet.co.kr Compliance Compliant with Universal Serial Bus Specification Revision 2.0 Compliant with USB Mass Storage Class specification version 1.0 Compliant with Serial ATA International Organization : Serial ATA Revision 2.6 USB 2.0 USB Bulk mode transport protocol SATA II Supports 3.0Gbps SATA II interface FLASH Supports up 64 CEs. 110/90 MB/s Sequential read/write rates Enhanced endurance by Dynamic/Static wear-leveling Supports BCH ECC to correct 8/15 bit errors in ...