High-Speed USB 2.0(480 Mbps) DPDT Switches
NLAS7222B, NLAS7222C High-Speed USB 2.0 (480 Mbps) DPDT Switches
ON Semiconductor’s NLAS7222B and NLAS7222C are part of ...
Description
NLAS7222B, NLAS7222C High-Speed USB 2.0 (480 Mbps) DPDT Switches
ON Semiconductor’s NLAS7222B and NLAS7222C are part of a series of analog switch circuits that are produced using the company’s advanced sub−micron CMOS technology, achieving industry−leading performance. Both the NLAS7222B and NLAS7222C are 2− to 1−port analog switches. Their wide bandwidth and low bit−to−bit skew allow them to pass high−speed differential signals with good signal integrity. Each switch is bidirectional and offers little or no attenuation of the high−speed signals at the outputs. Industry−leading advantages include a propagation delay of less than 250 ps, resulting from its low channel resistance and low I/O capacitance. Their high channel−to−channel crosstalk rejection results in minimal noise interference. Their bandwidth is wide enough to pass High−Speed USB 2.0 differential signals (480 Mb/s).
Features http://onsemi.com MARKING DIAGRAM
UQFN10 CASE 488AT XX = XX M G G
1
RON is Typically 8.0 W at VCC = 3.3 V Low Crosstalk: −30 dB @ 250 MHz Low Current Consumption: 1.0 mA Channel On−Capacitance: 8.0 pF (Typical) VCC Operating Range: 1.65 V to 4.5 V > 700 MHz Bandwidth (or Data Frequency) These are Pb−Free Devices
M G
= =
Device Code 7222B = AS 7222C = AT Date Code Pb−Free Device
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 9 of this data sheet.
www.DataSheet.co.kr
...
Similar Datasheet