CSD-892-73

Specifications Digital Conversion Module １．General CSD-892-73 Spec. No.EN382892-73A 1/8 This instrument is the digital conversion module for strain gage applied transducers which adopt the DIN mounting type and in suitable with built-in control panel. ２．Specifications ２-１.Specifications for analog Bridge power supply Applicable transducers Input sensitivity Input range Zero adjustment range Non-Linearity Temperature coefficient Zero point Sensitivity Input noise Anlog filter A/D sampling A/D internal resolution DC5 V±0.25 V within 60 mA, with sensing Up to 4 pieces of strain gage applied transducers(350 ohm) can be connectable. 0.15 μV/d or more (d＝minimum scale) * 0.2 μV/d (In case of applying CE conformity standard.) －3.1 mV/V to 3.1 mV/V ±2.5 mV/V 0.01 %F.S. ±0.2 μV/℃ (When the calibration is made at 0.2 μV/d or more of the input sensitivity.) ±0.001 5 %F.S./℃ (When the calibration is made at 0.2 μV/d or more of the input sensitivity.) ±0.2 μVp-p or less (At the default setting of analog filter, digital filter and stabilization filter.) Approx. 4Hz (Changeable to 2Hz, 6Hz, 8Hz, 10Hz) 500 times/s (Changeable to 250 times/s, 100 times/s, 50 times/s.) 24 bits www.DataSheet.co.kr ２-２.Specification for digital Main display (Load display) Display range Display increment Display unit Over display AD value over display Condision display Display rate Judgement display Decimal point display Unit display －99 999 to 99 999 1 (Changeacle to 2, 5, 1...