DatasheetsPDF.com

G121SN01-V1 Dataheets PDF



Part Number G121SN01-V1
Manufacturers AUO
Logo AUO
Description LCD Module
Datasheet G121SN01-V1 DatasheetG121SN01-V1 Datasheet (PDF)

Spec. No.: Version: Total pages: Date: MDGD012-SN01-1 1 28 2005 – May - 11 AU OPTRONICS CORPORATION Product Functional Specifications 12.1 ” SVGA Color TFT-LCD Module Model Name: G121SN01 V.1 www.DataSheet.co.kr Approved by Prepared by GD- MDBU Marketing Division / AU Optronics Croporation Customer Checked & Approved by (C) Copyright AU Optroncis, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G121SN01 V.1 ver.1 1/28 Datasheet pdf - http://www.DataSheet4U..

  G121SN01-V1   G121SN01-V1


Document
Spec. No.: Version: Total pages: Date: MDGD012-SN01-1 1 28 2005 – May - 11 AU OPTRONICS CORPORATION Product Functional Specifications 12.1 ” SVGA Color TFT-LCD Module Model Name: G121SN01 V.1 www.DataSheet.co.kr Approved by Prepared by GD- MDBU Marketing Division / AU Optronics Croporation Customer Checked & Approved by (C) Copyright AU Optroncis, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G121SN01 V.1 ver.1 1/28 Datasheet pdf - http://www.DataSheet4U.net/ Version: 1 Total Pages: 28 Date: 2005/05/11 Product Functional Specification 12.1 inch SVGA Color TFT LCD Module Model Name: G121SN01 V.1 w w w . D a t a S h e e t . c o . k r (u ) Preliminary Specification ( ) Final Specification Note: This Specification is subject to change without notice. (C) Copyright AU Optroncis, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G121SN01 V.1 ver.1 2/28 D a t a s h e e t I. Contents 1.0 2.0 Handling Precautions…………………………………………………..…5 General Description……………………………………………………….6 2.1 Display Characteristics 2.2 Functional Block Diagram Absolute Maximum Ratings……………………………………………...8 Optical Characteristics……………………………………………………9 Signal Interface……………………………………………………………12 5.1 5.2 5.3 Connectors Signal Pin Signal Description 3.0 4.0 5.0 6.0 7.0 8.0 5.4 Signal Electrical Characteristics 5.5 Signal for Lamp Connector Pixel Format Image………………………………………………………16 6.1 Scanning Direction…...……………………………………………17 Parameter Guide Line CCFL Inverter…….…………………………...17 Interface Timing..…………………………………………………………18 8.1 8.2 Timing Characteristics Timing Definition www.DataSheet.co.kr 9.0 10.0 11.0 8.3 Timing Chart Power Consumption ……………………………………………………..22 Power ON/OFF Sequence……………………………………………….23 Reliability / Safety Requirement……………………………………..…24 11.1 11.2 Reliability Test Conditions Safety 12.0 13.0 11.3 Green Packing Dimension………………………….……………………………25 Mechanical Characteristics……………………………………………..26 13.1 13.2 13.3 LCM Outline dimension (Front View) LCM Outline Dimension (Rear View) Screw Note (C) Copyright AU Optroncis, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G121SN01 V.1 ver.1 3/28 Datasheet pdf - http://www.DataSheet4U.net/ II. Record of Revision Version and Date 0. 2004/11/01 1. 2005/05/11 Page All 6 6 8 9 Old Description First Draft Brightness: 180/140 Contrast ratio: 350:1 Vs: 690/890 All 200/160 500:1 Vs: 970/1270 New Description Remark Contrast ration, Viewing Angle, Updated CIE, Brightness 12 15 17 17 Signal Connector Clock frequency: 20/85 Add mating connector type Clock frequency: 30/50 Add 6.1: Scanning Direction Modify ICFL, FCFL, Vs, VCFL, PCFL, Lamp life 22 24 Add PCFL Modify high temperature & high humidity operation www.DataSheet.co.kr condition Modify Thermal shock condition 24 25 28 Add packing dimension Add screw note (C) Copyright AU Optroncis, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G121SN01 V.1 ver.1 4/28 Datasheet pdf - http://www.DataSheet4U.net/ 1.0 Handing Precautions 1) Since front polarizer is easily damaged, pay attention not to scratch it. 2) Be sure to turn off power supply when inserting or disconnection from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. 7) Do not open nor modify the module Assembly. 8) Do not press the reflector sheet at the back of the module to any directions. 9) In case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT module may be damaged. 10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate www.DataSheet.co.kr nor tilt the interface Connector of the TFT module. 11) After installation of the TFT module into an enclosure, do not twist nor bend the TFT module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT module from outside. Otherwise the TFT module may be damaged. 12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances or regulations for disposal. 13) Small amount of materials having no flammability grade is used in the LCD module should be supplied by power complied with requirements of Limited Power Source, or be applied exemption. 14) The LCD module is designed so that the CCFL in it is supplied by Limited Current Circuit. Do not connect the CFL in Hazardous Voltage C.


G121SN01-V4 G121SN01-V1 G150XG01-V0


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)