Document
Spec. No.: DDPM-M150XN07-0.1 Version: 1 Total pages: 26 Date: 2003-July-31
AU OPTRONICS CORPORATION
Product Specifications
15.0 ” XGA Color TFT-LCD Module
Model Name:
M150XN07
V.1
Approved by
Prepared by
DDBU Marketing Division / AU Optronics Croporation
Customer
Checked & Approved by
(C) Copyright
AU Optronics, Inc.
M150XN07 Ver0.1
Feb. 2003 All Rights Reserved. No Reproduction and Redistribution Allowed.
1/28
Product Specifications 15.0 ” XGA Color TFT-LCD Module Model Name:M150XN07 V.1
(u) Preliminary Specifications ( ) Final Specifications
(C) Copyright
AU Optronics, Inc.
M150XN07 Ver0.1
Feb. 2003 All Rights Reserved. No Reproduction and Redistribution Allowed.
2/28
i Contents
1.0 Handling Precautions 2.0 General Description
2.1 Display Characteristics 2.2 Functional Block Diagram
3.0 Absolute Maximum Ratings 4.0 Optical Characteristics
4.1 Signal for Lamp connector 4.2 Parameter guideline for CCFL Inverter
5.0 Signal Interface
5.1 Module Interface Connectors 5.2 Module Connector Pin Configuration 5.3 Backlight Connectors 5.4 Backlight Connector Pin Configuration 5.5 Signal Electrical Characteristics 5.6 Interface Timings Characteristics 5.7 Interface Timing Definition
6.0 Pixel format image 7.0 Power Consumption 8.0 Power ON/OFF Sequence 9.0 Backlight Characteristics
9.1 Signal for Lamp connector 9.2 Parameter guideline for CCFL Inverter
10.0Vibration, Shock, and Drop
10.1 Vibration & Shock 10.1.1 Vibration Test Spec 10.1.2 Shock Test Spec 10.2 Drop
11.0 Environment
11.1 Temperature and Humidity 11.1.1 Operating Conditions 11.1.2 Shipping Conditions 11.2 Atmospheric Pressure 11.3 Thermal Shock
12.0 Reliability
12.1 Failure criteria 12.2 Failure rate 12.2.1 Usage 12.2.2 Components de-rating 12.3 CCFL life 12.4 ON/OFF cycle
(C) Copyright
AU Optronics, Inc.
M150XN07 Ver0.1
Feb. 2003 All Rights Reserved. No Reproduction and Redistribution Allowed.
3/28
13.0 Safety
13.1 Sharp edge requirement 13.2 Material 13.2.1 Toxicity 13.2.2 Flammability 13.3 Capacitors 13.4 Hazardous voltage
14.0 Other requirements
14.1 Smoke free design 14.2 National test lab requirement
15.0 Label 16.0 Mechanical Characteristics
ii Record of Revision
Version and Date Page 0.1 2003/06/10 All Old description First Edition for Customer New Description All Remark
(C) Copyright
AU Optronics, Inc.
M150XN07 Ver0.1
Feb. 2003 All Rights Reserved. No Reproduction and Redistribution Allowed.
4/28
1.0
1) 2) 3) 4) 5) 6) 7) 8) 9)
Handling Precautions
10) 11)
12) 13)
14)
Since front polarizer is easily damaged, pay attention not to scratch it. Be sure to turn off power supply when inserting or disconnecting from input connector. Wipe off water drop immediately. Long contact with water may cause discoloration or spots. When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. Since CMOS LSI is used in this module, take care of .