DatasheetsPDF.com

M190EN02-V1 Dataheets PDF



Part Number M190EN02-V1
Manufacturers AUO
Logo AUO
Description LCD
Datasheet M190EN02-V1 DatasheetM190EN02-V1 Datasheet (PDF)

Spec. No.: Version: Total pages: Date: DDPM-EN02-0.1 1 24 2002-Sep-23 AU OPTRONICS CORPORATION Product Specifications 19.0” SXGA Color TFT-LCD Module Model Name: M190EN02 V.1 www.DataSheet.co.kr Approved by Prepared by IDBU Marketing Division / AU Optronics Croporation Customer Checked & Approved by (C) Copyright AU Optronics, Inc. September, 2002 All Rights Reserved. No Reproduction and Redistribution Allowed. M190EN02 v.1 Ver0.1 1/24 Datasheet pdf - http://www.DataSheet4U.net/ Pr.

  M190EN02-V1   M190EN02-V1


Document
Spec. No.: Version: Total pages: Date: DDPM-EN02-0.1 1 24 2002-Sep-23 AU OPTRONICS CORPORATION Product Specifications 19.0” SXGA Color TFT-LCD Module Model Name: M190EN02 V.1 www.DataSheet.co.kr Approved by Prepared by IDBU Marketing Division / AU Optronics Croporation Customer Checked & Approved by (C) Copyright AU Optronics, Inc. September, 2002 All Rights Reserved. No Reproduction and Redistribution Allowed. M190EN02 v.1 Ver0.1 1/24 Datasheet pdf - http://www.DataSheet4U.net/ Product Specifications 19.0” SXGA Color TFT -LCD Module Model Name: M 190EN02 V.1 www.DataSheet.co.kr (? ) Preliminary Specifications ( ) Final Specifications Note: This Specification is subject to change without notice. (C) Copyright AU Optronics, Inc. September, 2002 All Rights Reserved. No Reproduction and Redistribution Allowed. M190EN02 v.1 Ver0.1 2/24 Datasheet pdf - http://www.DataSheet4U.net/ i Contents ii Record of Revision 1.0 Handling Precautions 2.0 General Description 2.1 Display Characteristics 2.2 Functional Block Diagram 2.3 Optical Characteristics 2.4 Pixel format image 3.0 Electrical characteristics 3.1 Absolute Maximum Ratings 3.2 Connectors 3.3 Signal Pin 3.4 Signal Description 3.5 Signal Electrical Characteristics 3.6 Interface Timing 3.6.1 Timing Characteristics 3.6.2 Timing Definition 3.7 Power Consumption 3.8 Power ON/OFF Sequence 4.0 Backlight Characteristics 4.1 Signal for Lamp connector 4.2 Parameter guide line for CCFL Inverter www.DataSheet.co.kr 5.0 Vibration, shock and drop 5.1 Vibration and shock 5.2 Drop test 6.0 Environment 6.1 Temperature and humidity 6.1.1 Operating conditions 6.1.2 Shipping conditions 6.2 Atmospheric pressure 6.3 Thermal shock 7.0 Reliability 7.1 Failure criteria 7.2 Failure rate 7.2.1 Usage 7.2.2 Components de-rating 7.3 CCFL life 7.4 ON/OFF cycle 8.0 Safety 8.1 Sharp edge requirement 8.2 Material 8.2.1 Toxicity 8.2.2 Flammability 8.3 Capacitors 8.4 Hazardous voltage (C) Copyright AU Optronics, Inc. September, 2002 All Rights Reserved. No Reproduction and Redistribution Allowed. M190EN02 v.1 Ver0.1 3/24 Datasheet pdf - http://www.DataSheet4U.net/ 9.0 Other requirements 9.1 Smoke free design 9.2 National test lab requirement 10.0 Mechanical Characteristics ii Record of Revision Version and Date 0.1 2002/09/23 Page All Old description First Edition for Customer New Description All Remark 1.0 1) 2) 3) 4) 5) 6) Handling Precautions Since front polarizer is easily damaged, pay attention not to scratch it. www.DataSheet.co.kr Be sure to turn off power supply when inserting or disconnecting from input connector. Wipe off water drop immediately. Long contact with water may cause discoloration or spots. When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. Do not open nor modify the Module Assembly. Do not press the reflector sheet at the back of the module to any directions. 7) 8) 9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT-LCD module. 10) After installation of the TFT-LCD module into an enclosure (LCD monitor housing, for example), do not twist nor bend the TFT -LCD module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT -LCD module from outside. Otherwise the TFT -LCD module may be damaged. (C) Copyright AU Optronics, Inc. September, 2002 All Rights Reserved. No Reproduction and Redistribution Allowed. M190EN02 v.1 Ver0.1 4/24 Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr (C) Copyright AU Optronics, Inc. September, 2002 All Rights Reserved. No Reproduction and Redistribution Allowed. M190EN02 v.1 Ver0.1 5/24 Datasheet pdf - http://www.DataSheet4U.net/ 2.0 General Description This specification applies to the 19.0 inch Color TFT-LCD Module M190EN02. The display supports the SXGA (1280(H) x 1024(V)) screen format and 16.7M colors (RGB 8-bits data). All input signals are 2 Channel LVDS interface compatible. This module does not contain an inverter card for backlight. 2.1 Display Characteristics The following items are characteristics summary on the table under 25 ¢J condition: ITEMS Screen Diagonal Active Area Pixels H x V Pixel Pitch Pixel Arrangement Display Mode White Luminance ( Center ) Contrast Ratio Optical Response Time Nominal Input Voltage VDD Power Consumption (VDD line + CCFL line) Weight Physical Size Electrical Interface Support Color Temperature Range Operating Storage (Shipping) Unit [mm] [mm] [mm] SPECIFICATIONS 480(19") 376.32 (H) x 301.056 (V) 1280(x3) x 1024 0.294 (per one triad) x 0.294 R.G.B. Vertical Stripe Normally Black 250 cd/m2 @7mA (Typ) 600 : 1 (Typ) 25 (Typ) +5.0 V 28W (typ.) (w/o Inverter.


M190EG02-V4 M190EN02-V1 M190EN02-V2


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)