Document
www.DataSheet4U.net
Product Description: T420HW01 V2 TFT-LCD PANEL
AUO Model Name: T420HW01 V2 Customer Part No/Project Name: Customer Signature Date AUO
Approved By: Yu Chieh Lin Reviewed By: Hong Jye Hong Prepared By: Stanley Chiang
Date
©Copyright AU Optronics, Inc. January, 2007 All Rights Reserved. No Reproduction and Redistribution Allowed
T420HW01 V2
0/28
www.DataSheet4U.net
Document Version: 1.0 Date:2007/4/27
Product Functional Specification 42” Full-HD Color TFT-LCD Module Model Name: T420HW01 V2
(*) Preliminary Specification ( ) Final Specification
Note : This specification is subject to change without notice.
©Copyright AU Optronics, Inc. January, 2007 All Rights Reserved. No Reproduction and Redistribution Allowed
T420HW01 V2
1/28
www.DataSheet4U.net
Contents
No
COVER CONTENTS RECORD OF REVISIONS 1 2 3 GENERAL DESCRIPTION ABSOLUTE MAXIMUM RATINGS ELECTRICAL SPECIFICATIONS
ITEM
3-1 3-2 3-3 3-4 3-5 3-6 4 5 6 7 7-1 7-2 8
ELECTRICAL CHARACTREISTICS INTERFACE CONNECTIONS SIGNAL TIMING SPECIFICATIONS SIGNAL TIMING WAVEFORMS COLOR INPUT DATA REFERNECE POWER SEQUENCE OPTICAL SPECIFICATIONS MECHANICAL CHARACTERISTICS RELIABILITY INTERNATIONAL STANDARDS SAFETY EMC PACKING
9
PRECAUTIONS
©Copyright AU Optronics, Inc. January, 2007 All Rights Reserved. No Reproduction and Redistribution Allowed
T420HW01 V2
2/28
www.DataSheet4U.net
Record of Revision
Version 1.0 Date 2007/4/27 No Old Description First release New Description Remark
©Copyright AU Optronics, Inc. January, 2007 All Rights Reserved. No Reproduction and Redistribution Allowed
T420HW01 V2
3/28
www.DataSheet4U.net
1. General Description
This specification applies to the 42 inch Color TFT-LCD Module T420HW01 V2. This LCD module has a TFT active matrix type liquid crystal panel 1920x1080 pixels, and diagonal size of 42 inch. This module supports 1920x1080 Full-HD mode (Non-interlace). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. The T420HW01 V2 has been designed to apply the 8-bit 2 channel LVDS interface method. It is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important.
* General Information
Items
Active Screen Size Display Area Outline Dimension Driver Element Display Colors Number of Pixels Pixel Pitch Pixel Arrangement Display Mode Lamp quantity, type Surface Treatment
Specification
42.02 930.24(H) x 523.26(V) 983.0(H) x 576.0(V) x 52.7(D) a-Si TFT active matrix 16.7M 1920 x 1080 0.4845 RGB vertical stripe Normally Black 18pcs, Straight type AG, 3H
Unit
inches mm mm
Note
With inverter
Colors Pixel mm
pcs
©Copyright AU Optronics, Inc. January, 2007 All Rights Reserved. No Reproduction and Redistribution Allowed
T420HW01 V2
4/28
www.DataSheet4U.net
Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit. Item Symbo l Power Supply Input Voltage Logic Input Voltage BLU Input Voltage BLU Brightness Control Voltage Ambient Operating Temperature Ambient Operating Humidity Storage Temperature Storage Humidity Shock (non-operation) Vibration (non-operation) Thermal shock Altitude test Note 1 : Duration = 50msec Note 2 : Maximum Wet-Bulb should be 50 ℃ and No condensation. Note 3 : Half sine wave, shock level : 50G(11ms), direction : ±x, ±y, ±z (one time each direction) Note 4 : Wave form : Random, vibration level : 1.5G RMS, Bandwidth : 10~500Hz Duration : X,Y,Z 30min (one time each direction) Note 5 : -20C/1hr ~ 60C/1hr, 100 cycles V DD Vin V DDB BL ON T OP H OP T ST H ST -0.3 -0.3 -0.3 -0.3 0 10 -20 10 -20 50000feet (12Kpa) 14 3.6 26.4 3.6 +50 80 +60 80 50 1.5 60 [Volt] [Volt] [Volt] [Volt] [ C] [%RH] [ C] [%RH] G G C
o o
Min
Max
Unit
Note
1 1 1 1 2 2 2 2 3 4 5
©Copyright AU Optronics, Inc. January, 2007 All Rights Reserved. No Reproduction and Redistribution Allowed
T420HW01 V2
5/28
www.DataSheet4U.net
2. Electrical Specification
The T420HW01 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second input, which powers the CCFL, is typically generated by an inverter.
3-1 Electrical Characteristics
Parameter Symbol Min LCD: Power Supply Input Voltage Power Supply Input Current Power Consumption Inrush Current LVDS Interface Differential Input High Threshold Voltage Differential Input Low Threshold Voltage Common Input Voltage CMOS Interface Input High Threshold Voltage Input Low Threshold Voltage Backlight Power Consumption Life Time VIH (High) VIL (Low) 50000 (175) 60000 (184) Watt Hours 2 3 0 1 Vdc 2.0 3.3 Vdc VCIM 0.6 1.2 1.8 V VTL -100 mV 4 Vdd Idd Pc I RUSH VTH 10.8 12 1 12 4 +100 13.2 Vdc A Watt A mV 4 1 1 5 Values Typ Max Unit Notes
The performance of the Lamp in LCM, for example life time or brightnes.