AD412

E-pHEMT MMIC Product Features 4-Way Splitter Small size (3X3 mm) QFN SMD Type package Higher productivity Lower manufacturing cost -63dBc CSO 135 Channels @ +15dBmV/ch -77dBc CTB 135 Channels @ +15dBmV/ch -78dBc XMD 135 Channels @ +15dBmV/ch 5.2 dB Typical Noise Figure 75 ohm input and outputs AD412 (Preliminary) Application Multi Tuner Set-Top Boxes Home Gateways FTTx (G-PON, GE-PON) Package : QFN 3X3 Description AD412 is designed as low cost Active Divider for many applications including FTTH, CATV System. This MMIC is based on Gallium Arsenide Enhancement Mode pHEMT which shows low current draw and very low noise. The data in this spec sheet is valid only for 75 ohm application. Specifications PARAMETER Frequency Gain Gain Flatness Input Return Loss Output Return Loss IN&OUT Port Isolation OUT&OUT Port Isolation Output IP3 1dB Compression Point Noise Figure CSO CTB XMOD DC Current NOTE 1. Test conditions unless otherwise noted. Test Freq = 500MHz, T=25℃, Vdd=5V, 75Ω system 2. OIP3 measured with 2 tones at an output power of +0dBm/tone separated by 1MHz, Test Freq = 500MHz UNIT MHz dB dB dB dB dB dB dBm dBm dB dBc MIN TYP 50 ~ 1000 MAX Condition 5 6 0.4 -10 -12 www.DataSheet.net/ 1 -26 -29 30 16.3 33 18.3 5.2 -63 -77 -78 220 6 -60 -70 -70 135 channel @ Input Power +15dBmV/ch Vdd = 5.0V 30 ~ 870MHz dBc dBc mA Absolute Minimum and Maximum Ratings PARAMETER Device Voltage Operating Temperature Storage Temperature UNIT VDC MIN TYP +5 ...