1575 MHZ GPS BAW Filter
Data Sheet
Features
• • • • • • For GPS applications Usable bandwidth of 30 MHz Single-ended operation Ceramic Surface M...
Description
Data Sheet
Features
For GPS applications Usable bandwidth of 30 MHz Single-ended operation Ceramic Surface Mount Package This part number is a replacement for part number CRF-1575-4 Hermetic
Part Number 880273 1575 MHz BAW Filter
Package
Surface Mount 3.26 x 1.60 x 0.84 mm
Pin Configuration
Bottom View
www.DataSheet.net/
I/O
I/O
GND
Pin No. I/O GND
Description Input/Output Ground
Dimensions shown are nominal in millimeters All tolerances are ±0.13mm except overall length and width ±0.25mm Overall width, length, and thickness are the only critical dimensions. All other dimensions are for reference only. Body: Sapphire Lid: Alumina Terminations: Au plating 0.5 - 2.5µm, over a 2.0 – 6.0 µm Ni plating
Subject to change or obsolescence without notice
Rev B
November 2009
Page 1 of 5
Datasheet pdf - http://www.DataSheet4U.co.kr/
Data Sheet
Operating Temperature Range: (2) -40 to +85 oC
Part Number 880273 1575 MHz BAW Filter
Electrical Specifications (1)
Parameter (3)
10dB Center Frequency Insertion Loss at Fo 3 dB Bandwidth (4) 40 dB Bandwidth (4) Amplitude Variation (4) 1565 - 1585 MHz Input/Output VSWR at Fo Source Impedance Load Impedance Notes:
1. 2. 3. 4. 5.
Minimum
1570 30 -
Typical
1575 45 120 1.2 1.5 50 50
Maximum
1580 4.0 160 2 2:1 -
Unit
MHz dB MHz MHz dB − Ω Ω
All specifications are based on the test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance...
Similar Datasheet