Connectors
Product Specification
Series: QSH/QTH High Speed Socket 0.5 mm pitch
1.0 SCOPE 1.1 This specification covers performanc...
Description
Product Specification
Series: QSH/QTH High Speed Socket 0.5 mm pitch
1.0 SCOPE 1.1 This specification covers performance, tests and quality requirements for the Samtec QSH/QTH High Speed Socket/Terminal 0.5mm pitch Series in a 5mm height configuration (unless otherwise noted). 2.0 ELECTRICAL 2.1 Dielectric Withstanding Voltage, DWV, per EIA-364-20 2.1.1 375 VAC mated with QTH 2.2 Insulation Resistance, IR, per EIA-364-21 2.2.1 > 5,000 Meg Ohms --- PASS 2.3 Low Level Contact Resistance, LLCR, per EIA-364--23 2.3.1 21.8 milli Ohms Average - Contact System 2.3.2 4.1 milli Ohms Average - GND System 2.4 Current Carrying Capacity for a 30°C temp rise, CCC, per EIA-364-70 2.4.1 1.0 A (6 Contacts in series) 2.4.2 7.8 A - GND System, Two Banks
www.DataSheet.net/
3.0 MATERIALS 3.1 Insulator Material 3.1.1 LCP 3.2 Contact 3.2.1 Copper Alloy with Gold over 50 microInches Nickel
4.0 MECHANICAL 4.1 Operational Temperature 4.1.1 -55 degrees C to 125 degrees C 4.2 Mating/Unmating forces, per EIA-364-13 4.2.1 4.5/4.7 lbs respectively - One Bank 4.2.2 14.5/13.3lbs respectively - Three Banks 4.2.3 27.2/24.8 lbs respectively - Five Banks 4.3 Durability after 100 cycles per EIA-364-17B and EIA-364-31B 4.3.1 LLCR change < 15.0 milli-Ohms --- PASS 4.4 Normal Force at 0.006 inches deflection, per EIA-364-04 4.4.1 90 gr.
Revision: B Date: 6/19/2008 Specification: PSQ-004
Reviewed by: JET Checked by: JET Approved by: JET Edited by: RAS
© 2008 Samtec, Inc. Page 1
Datasheet pdf - http://www.DataS...
Similar Datasheet