Document
MCOTS-C-28-12-QT Single Output Quarter Brick Military COTS DC/DC Converters
16-40V
Continuous Input
16-50V
Transient Input
12V
Output
10A
Output
a pu d bl va ic n at ce io d n
Full Power Operation: -55°C to +100°C
The MilQor series of MIL COTS DC/DC converters brings SynQor’s field proven high-efficiency synchronous rectification technology to the Military/Aerospace industry. SynQor’s ruggedized encased packaging approach ensures survivability in demanding environments. Compatible with the industry standard format, these converters operate at a fixed frequency, and follow conservative component derating guidelines. They are designed and manufactured to comply with a wide range of military standards Operational Features
www.DataSheet.net/
91% @ 5A / 90% @ 10A Efficiency
• High efficiency, 90% at full rated load current • Operating input voltage range: 16-40 V • Fixed frequency switching provides predictable EMI • No minimum load requirement
Designed and Manufactured in the USA
Mechanical Features
Protection Features
• Industry standard quarter-brick pin-out configuration • Size: 1.54" x 2.39" x 0.50" (39.0 x 60.6 x 12.7mm) • Total weight: 3 oz (85 g)
• Input under-voltage lockout • Output current limit and short circuit protection • Active back bias limit • Output over-voltage protection • Thermal shutdown
Control Features
Screening/Qualification
• On/Off control referenced to input side • Remote sense for the output voltage • Output voltage trim range of -20%, +10%
Safety Features
• 2250 V, 30 MW input-to-output isolation • Certified 60950-1 requirements for basic insulation (see Standards and Qualifications page) • CE Marked • RoHS compliant
Phone 1-888-567-9596
• AS9100 and ISO 9100:2000 certified facility • Qualification consistent with MIL-STD-883 • Avialable with standard or military grade screening • Pre-cap inspection per IPC-610, Class III • Temperature cycling per MIL-STD-883, Method 1010, Condition B, 10 cycles • Burn-In at 100°C baseplate temperature • Final visual inspection per MIL-STD-2008 • Full component traceability
Product # MCOTS-C-28-12-QT
www.synqor.com
Doc.# 005-0005277 Rev. 1
06/11/09
Page 1
Datasheet pdf - http://www.DataSheet4U.co.kr/
MCOTS-C-28-12-QT
Output: 12V Current: 10A
Technical Specification
BLOCK DIAGRAM
a pu d bl va ic n at ce io d n
www.DataSheet.net/
TYPICAL CONNECTION DIAGRAM
Vin
External Input Filter
Vin(+)
Vout(+)
Electrolytic
Vsense(+)
Trim
Rtrim-up
ON/OFF
or
Vsense(_) Vout(_)
Rtrim-down
Cload
Iload
Vin(_)
Product # MCOTS-C-28-12-QT
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0005277 Rev. 1
06/11/09
Page 2
Datasheet pdf - http://www.DataSheet4U.co.kr/
MCOTS-C-28-12-QT
Output: 12V Current: 10A
Technical Specification
MCOTS-C-28-12-QT ELECTRICAL CHARACTERISTICS
ABSOLUTE MAXIMUM RATINGS Input Voltage Non-Operating Operating Operating Transient Protection Isolation Voltage Input to Output Input to .