Document
COMPONENTS PRODUCT INFORMATION
NEW
HDMI Standard Type D HDMI Micro Connector
CONNECTOR MB-0233-1 September 2011
DC3 Series
RoHS Compliant
Recently in the camcorder and digital still camera market, devices that are compatible with digital high-vision are becoming the standard. The DC3 Series is a connector compliant with the HDMI D Type standard targeting these types of portable devices. *HDMI stands for High-Definition Multimedia Interface and is a registered trademark of HDMI Licensing LLC.
Features
www.DataSheet.net/
2 row, 0.4mm pitch, 19 position, compact connector Impedance-matching design compliant with high-speed transmission. Grounded structure design for EMI control. Design prevents solder wicking and flux scattering during reflow. Available in on-board and mid-mount types.
Applicable Markets
Mobile phone, high definition camcorder, digital still camera (single-lens reflex, compact) , tablet PC, portable game device, compact audio player, etc.
General Specifications
No. of Contacts: 19 position Contact Resistance: Contact Area, 60mΩ max.; Shell Area, 50mΩ max. Dielectric Withstanding Voltage: AC 250Vr.m.s per minute (when not mated) Operating Temperature and Humidity Range Temperature: -20 Deg. C to +85 Deg. C Percentage Humidity: 85% max. Rated Current: 0.3A per contact Durability: 5,000 mating cycles Impedance: 100Ω ± 25% (connector area)
JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd.
1/6
Datasheet pdf - http://www.DataSheet4U.co.kr/
MB-0233-1
Materials and Finishes Receptacle
Component Insulator Contact Shell Material / Finish Heat resistant plastic Copper alloy / Au plating over Ni Stainless steel / Sn plating over Ni
Ordering Information
Receptacle
DC3 R * 19
Series Receptacle No. of Contacts
* A *
www.DataSheet.net/
Modification Code Contact: Au plating J: DIP type; H: SMT type
JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd.
2/6
Datasheet pdf - http://www.DataSheet4U.co.kr/
MB-0233-1
Drawings
■ Receptacle --Mid-mount Type (mounting depth: 0.95mm version)
DC3R019JA1 / 5 [SJ110571 / SJ111076]
DC3R019JA1 Shell DIP Length 1.5
DC3R019JA5 0.8
No.19 2.9
No.1
Mounting Depth
8.3
0.95
No.18
No.2
www.DataSheet.net/
*Please refer to SJ Drawing when considering this product.
Applicable Board Dimension
JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd.
Shell DIP Length
1.95
3/6
Datasheet pdf - http://www.DataSheet4U.co.kr/
10
MB-0233-1 ■ Receptacle --Mid-mount Type (mounting depth: 0.65mm version)
DC3R019JA7 [SJ111784]
No.19 2.9
No.1
2.25
www.DataSheet.net/
10
0.65
8.3
*Please refer to SJ Drawing when considering this product.
Applicable Board Dimension
JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd.
0.65
No.18
No.2
Shell DIP Length
4/6
Datasheet pdf - http://www.DataSheet4U.co.kr/
Mounting Depth
MB-0233-1 ■ Receptacle --On-board Type (shell 4 point DIP version)
DC3RX19JA2 / 3 [SJ111288 / SJ111264]
DC3RX19JA2 Shell DIP Length 0.8
DC3RX19JA3 0.63
7.3 No.19 2.9 No.1
www.DataSheet.net/
No.18
No.2
*Please refer to SJ Drawing when considering this product.
7.15
Applicable Board Dimension
JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd.
Shell DIP Length
5/6
Datasheet pdf - http://www.DataSheet4U.co.kr/
MB-0233-1 ■ Receptacle --On-board Type (all SMT version)
DC3R019HA1 [SJ111526]
*Please refer to SJ Drawing when considering this product.
6.5 No.19 2.9 No.1
No.18
No.2
www.DataSheet.net/
6.75
Applicable Board Dimension
Notice: Products shown in this brochure are made
for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for lifesupport systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: computers, office machines, measuring devices, telecommunication devices (terminals, mobile devices), AV devices, household applications, FA devices, etc.
Japan Aviation Electronics Industry, Limited
Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946
* The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd.
6/6
Datasheet pdf - http://www.DataSheet4U.co.kr/
.