CINT1150

CINT1150 3 Years Warranty 2” x 4” x 1.3” Package For 1U Applications 150Watts with air & 100Watts Convection Cooled Universal Input 90-264 VAC Approved to EN/IEC/UL60950-1 2nd Edition Power Fail/Output good signal 150W Single Output Series ITE Power Supply Compliant (LVD, RoHS) Optional Chassis/Cover International Safety Agency Approvals RoHS Specifications AC Input 100-240Vac +/- 10%, 47-63 Hz single phase 120-370 Vdc Input Current 115Vac: 2A, 230Vac: 1A Inrush Current 264Vac, cold start: will not exceed 50A Input Fuses F1, F2: 4A, 250VAC fuses provided on all models Earth Leakage Current <750µA@264Vac, 60Hz, NC Efficiency 88% typical at 115V Output Power 150W continuous with 200lfm airflow, 100W convection cooled – See chart for specific voltage model ratings Transient Response 50% load step. ∆i/∆t <0.2A/µS Max Volt Deviation = 3% Ripple and Noise See chart Output Voltage Voltage Adjustability See chart +/-5% from nominal All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. Turn On Time Minimum Load Not required Total Regulation +/- 5%. See chart Vibration Operating: 0.003g2/Hz, 1.5grms overall, 3 axes, 10 min/axis Non-Operating: 0.026 g2/Hz, 5.0grms overall, 3 axes, 1 hr/axis Dimensions W: 2.0” x L: 4.0” x H: 1.3”. Weight: 183g Less than 2 sec. @115Vac (inversely proportional to input voltage and thermistor temperature) Hold-up Time >12mSec at full load and 120VAC Signals AC Power Fail/DC OK Overload Protection Hiccup...