Galvanic isolated octal high-side smart power solid state relay
ISO8200B
Galvanic isolated octal high-side smart power solid state relay
Datasheet
− target specification
Features
Typ...
Description
ISO8200B
Galvanic isolated octal high-side smart power solid state relay
Datasheet
− target specification
Features
Type Vdemag(1) RDS(on)(1) 0.11 Ω Iout(1) 0.7 A Vcc 45 V
ISO8200B Vcc- 45 V
1. Per channel
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Parallel input interface Direct and synchronous control mode High common mode transient immunity Output current: 0.7 A per channel Short-circuit protection Channel overtemperature protection Thermal independence of separate channels Common output disable pin Case overtemperature protection Loss of GNDcc and Vcc protection Undervoltage shutdown with auto restart and hysteresis Overvoltage protection (Vcc clamping) Very low supply current Common fault open drain output 5 V and 3.3 V TTL/CMOS compatible I/Os Fast demagnetization of inductive loads Reset function for IC outputs disable ESD protection
PowerSO36
Description
The ISO8200B is a galvanic isolated 8-channel driver featuring a very low supply current. It contains 2 independent galvanic isolated voltage domains (Vcc for the power stage and Vdd for the digital stage). Additional embedded functions are: loss of GND protection, undervoltage shutdown with hysteresis, and reset function for immediate power output shutdown. The IC is intended to drive any kind of load with one side connected to ground. Active channel current limitation combined with thermal shutdown, (independent for each channel), and automatic restart, protect the device against overload and short-circuit. In overlo...
Similar Datasheet