L6362

L6362 Fully integrated device transceiver IC Data brief Features ■ ■ ■ ■ ■ Supply voltage from 8 V to 32.5 V 2 programmable output stages: high-side, lowside or push-pull (< 4 Ω @125 °C) Up to 230 kHz communication speed 2 industrial digital inputs, type 1 compliant and programmable filter Short-circuit and overcurrent outputs protection through current limitation and programmable cut-off current Overvoltage protection (>36 V) 3.3 V/5 V selectable 50 mA linear regulator (with maximum power dissipation = 200 mW) On chip high efficiency adjustable 50 mA synchronous step-down switching regulator Control, configuration and diagnostic registers Diagnostic dual LED sequence generator and driver Internal clock generator with programmable frequency divider 5 V and 3.3 V compatible I/Os Integrated active reverse polarity protection with 200 mV @ 200 mA drop Integrated, IEC61000-4-5 surge protection, with source impedance 500 Ω Overtemperature protection ESD protection Conform to IEC 61000-4-4 Miniaturized: QFN 3.5 x 5 x 1 26 lead package QFN 26L Description The L6362 is a monolithic dual push pull Transceiver fully compliant to PHY2 (3 wires) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. C/Q and I/Q output stages are programmable: high-side, low-side or push-pull; also cut-off current and cutoff current delay time are programmable. Cut-off current and cut-off current delay time combined with thermal shutdown and automatic re-start protect the device a...