RHF310

RHF310 Rad-hard 400 µA high-speed operational amplifier Preliminary data Features ■ OptimWatt device featuring ultra-low 2 mW consumption and low 400 μA quiescent current(a) Bandwidth: 120 MHz (gain = 2) Slew rate: 115 V/μs Specified on 1 kΩ Input noise: 7.5 nV/√ Hz Tested with 5 V power supply 300 krad MIL-STD-883 1019.7 ELDRS free compliant SEL immune at 125° C, LET up to 110 MEV.cm2/mg SET characterized, LET up to 110 MEV.cm2/mg QMLV qualified under SMD 5962-0723301 Mass: 0.45 g www.DataSheet.net/ TM Pin connections (top view) 1 NC IN IN + -VCC 4 5 8 NC +VCC OUT NC ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the package. Description The RHF310 is a very low power, high-speed operational amplifier. A bandwidth of 120 MHz is achieved while drawing only 400 µA of quiescent current. This low-power characteristic is particularly suitable for high-speed battery powered devices requiring dynamic performance. The RHF310 is a single operator available in a Flat-8 package, saving board space as well as providing excellent thermal performance. Applications ■ ■ ■ ■ Low-power, high-speed systems Communication and space equipment Harsh radiation environments ADC drivers Device summary SMD pin Quality level Engineering model Table 1. Order code RHF310K1 Package Flat-8 Flat-8 Lead finish Gold Gold Marking RHF310K1 5962F0723101VXC EPPL - Packing Strip pack - RHF310K-01V 5962F0723301VXC QMLV-Flight Note: C...