Differential LVPECL Crystal Clock Oscillators HPK5361 Series 200 fsec Jitter +2.5V +3.3V “K” Family
Femto second integrated phase jitter (200 fs typical, 12 KHz to 20 MHz) Superior phase noise (-138 dBc/Hz at 10 KHz and -144 dBc/Hz at 100 KHz offset). High performance with surprisingly low price. 2.5V or 3.3V supply voltage. General Specifications Product Series Frequency Range Output Logic Frequency Stability vs Operating Temperature Range
MERCURY
Since 1973
Supply Voltage VCC Output Voltage HIGH “1”, VOH Output Voltage LOW “0”, VOL Output Swing Current Consumption Load Rise Time (Tr) Fall Time (Tf) Duty Cycle Tri-state Function on pad No. 1 Phase Jitter (RMS) SSB Phase Noise (dBc/Hz). Typical Start-up Time Aging
(1)Inclusive
HPK5361; “K” family characteristics. Tri-State on pad 1 40 MHz ~ 200 MHz. Differential PECL square wave Commercial “ C ”:: Industrial “ I ”: Stability Code -10°C to +70°C -40°C to +85°C ±25 ppm A D ±50 ppm B E ±100 ppm C F Custom ±xx ppm Cxx Ixx If custom, use “temperature range code + desired stability in ppm” for the stability code. Example: “C20” (±20 ppm over -10 to +70°C). +2.5 V ± 5 % (Voltage code is “25”); or +3.3 V ± 5 % (Voltage code is “3”) VDD-1.025 V min.; VDD-0.95 V typical; VDD-0.88 V max. Condition: 50 ohms to VDD-2V VDD-1.810 V min.; VDD-1.70 V typical; VDD-1.62 V max. Condition: 50 ohms to VDD-2V 595 mV min; 750 mV typical; 930 mV max. 35 mA typical; 50 mA max. 50 ohms into VCC-2V or Thevenin equivalent (terminating resistors required on all outputs). 0.3 n sec. typ; 0.5 n sec. max. 20%Æ80% of waveform 0.3 n sec. typ; 0.5 n sec. max. 80%Æ20% of waveform
www.DataSheet.net/
Offset 125 MHz
50% ± 5% max. measured at 50% waveform If no connection or VDD*70% min is applied: Output. Internal pull-up Oscillation disable time is 0.2 u sec max. If VDD*30% max is applied: High impedance. Current consumption is 10 uA typical Oscillation enable time is 2 m sec. max. 200 fs typical (12 KHz to 20 MHz integrated) 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz -50 -82 -116 -138 -144 -149 -155 3 ms typical; 10 m sec. max. ±3 ppm / year max.
Packaging 180 mm reel; 16 mm tape, 7.8 mm pitch. 1000 pcs per reel. of 25°C tolerance, operating temperature range, ±10% input voltage variation, load change, aging at +25°C, shock and vibration
MERCURY
MERCURY Page 1 of 4
www.mercury-crystal.com
Date: January 24, 2011 Rev. 0
Taiwan: TEL (886)-2-2406-2779, FAX (886)-2-2496-0769, e-mail:
[email protected] U.S.A.: TEL (1)-909-466-0427, FAX (1)-909-466-0762, e-mail:
[email protected]
Datasheet pdf - http://www.DataSheet4U.co.kr/
Differential LVPECL Crystal Clock Oscillators HPK5361 Series 200 fsec Jitter +2.5V +3.3V “K” Family
Absolute Maximum Rating Permanent damage may be created if operate beyond limits specified Ta=25°C, Vss=0V Parameters Supply Voltage Input Voltage Output Voltage Rating Min. Vss-0.5V Vss-0.5V Vss-0.5V Max. 5.0V VDD+0.5V VDD+0.5V
MERCURY
Since 1973
Environmental Performance Sp.