(DNT90CA/PA) 900 MHz Frequency Hopping Spread Spectrum Transceiver
- 900 MHz Frequency Hopping Spread Spectrum Transceiver - Point-to-point, Point-to-multipoint, Peer-to-peer and Store & ...
Description
- 900 MHz Frequency Hopping Spread Spectrum Transceiver - Point-to-point, Point-to-multipoint, Peer-to-peer and Store & Forward Capabilities - Transmitter Power Configurable to 40 or 158 mW - Built-in 0 dBi Chip Antenna - 100 kbps RF Data Rate - 128-Bit AES Encryption - Separate Serial Port for Diagnostics - Analog and Digital I/O for Sensor Applications - FCC and Canadian IC Certified for Unlicensed Operation
The DNT90CA/PA FHSS transceiver modules provides a low-cost, versatile solution for wireless data communications in the 900 MHz ISM band. The DNT90CA/PA RF output power can be set at 40 or 158 mW. The DNT90CA/PA receiver input is protected by low-loss SAW filter, providing an excellent combination of receiver sensitivity and out-of-band interference rejection. The DNT90CA/PA modules include analog, digital and serial I/O, providing the flexibility to serve applications ranging from cable replacements to sensor networks. The built-in chip antenna makes these modules very easy to integrate.
DNT90CA DNT90PA
Low Cost 900 MHz FHSS Transceiver Module with I/O
DNT90CA/PA Absolute Maximum Ratings Rating Power Supply Input All Input/Output Pins Non-Operating Ambient Temperature Range Value -0.5 to +6.5 -0.5 to +3.3
www.DataSheet.net/
Units V V
o
-40 to +85
C
DNT90CA/PA Electrical Characteristics Characteristic Operating Frequency Range Hop Duration Number of RF Channels Modulation RF Data Transmission Rate Receiver Sensitivity @ 10-5 BER Transmitter RF Output Power Optimum...
Similar Datasheet