SAW Filter
SF2109D
• • • • Low Insertion Loss 3.8 X 3.8 X 1.2 mm Surface-Mount Case Differential 750 Ohm IN and 900 Ohm OUT Complie...
Description
SF2109D
Low Insertion Loss 3.8 X 3.8 X 1.2 mm Surface-Mount Case Differential 750 Ohm IN and 900 Ohm OUT Complies with Directive 2002/95/EC (RoHS)
Pb
305.00 MHz SAW Filter
Value
+10 30 -40 to +85 -15 to +85 260°C for 30 s
Absolute Maximum Ratings Rating
Maximum Incident Power in Passband Max. DC voltage between any 2 terminals Storage Temperature Range Operating Temperature Suitable for lead-free soldering - Max Soldering Profile
Units
dBm VDC °C °C
SM3838-8 Electrical Characteristics Characteristic
Center Frequency Insertion Loss Amplitude Ripple (p-p) fc-4.0 to fc+4.0 MHz Low Side Attenuation (fc-9.28 MHz) Low Side Attenuation (fc-5.78 MHz) High Side Attenuation (fc+5.78 MHz) High Side Attenuation (fc+9.28 MHz) Delay Ripple (p-p) fc-4.0 to fc+4.0 MHz Group Delay in Passband Case Style Lid Symbolization (Y=year, WW=week, S=shift) See note 4
Sym
fC IL
Notes
1 1, 2
Min
Typ
305 7 1.2 35 35 26 35
Max
10 2.0
Units
MHz dB dB
30 25 20 30 1, 2, 3 6
www.DataSheet.net/
dB
300 ns 500 SM3838-8 3.8 x 3.8 mm Nominal Footprint 607 YWWS
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes:
1. 2. 3. 4. 5. 6. 7. 8. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection i...
Similar Datasheet