8-BIT SHIFT REGISTERS
UNISONIC TECHNOLOGIES CO., LTD
U74HCT595
8-BIT SHIFT REGISTERS WITH LATCHED 3-STATE OUTPUT REGISTERS
DESCRIPTION
The ...
Description
UNISONIC TECHNOLOGIES CO., LTD
U74HCT595
8-BIT SHIFT REGISTERS WITH LATCHED 3-STATE OUTPUT REGISTERS
DESCRIPTION
The UTC 74HCT595 contains an 8-bit register with asynchronous reset input and an 8-bit latch with output enable input. Data on the Serial Data Input (SER) will be shift into the internal shift register during every LOW-to-HIGH transition on the Shift Clock. The latch will latch the 8-bit data from the shift register during the LOW-to-HIGH transition on the Latch Clock. The shift register also provides a serial output.
FEATURES
* Operation Voltage Range: 4.5V ~ 5.5V * High Noise Immunity * Output Compatibility with CMOS and TTL * 8-Bit Serial-In, Parallel-Out Shift * Inputs are TTL voltage compatiable
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
U74HCT595L-S16-R
U74HCT595G-S16-R
U74HCT595L-P16-R
U74HCT595G-P16-R
Package
SOP-16 TSSOP-16
CMOS IC
SOP-16 TSSOP-16
Packing Tape Reel Tape Reel
MARKING
www.unisonic.com.tw Copyright © 2022 Unisonic Technologies Co., Ltd
1 of 6
QW-R502-666.D
U74HCT595
PIN CONFIGURATION
CMOS IC
OE
SRCLR
FUNCTION TABLE
FUNCTION
SRCLK
A Low-Level on SRCLR only affects the shift
X
registers.
Empty shift register loaded into storage register.
X
Shift register clear. Parallel outputs in high-impedance OFF-state
X
Logic high level shifted into the first shift register.
Contents of all shift register stages shifted through,
↑
e.g. previous state of stage G(internal QG’) appears
on the seri...
Similar Datasheet