Multi-mode SCSI Terminator
SS7500 Multi-mode SCSI Terminator
FEATURES
!" Fully compliant with Ultra160/m SCSI, Ultra2 and Ultra3 standards. !" Aut...
Description
SS7500 Multi-mode SCSI Terminator
FEATURES
!" Fully compliant with Ultra160/m SCSI, Ultra2 and Ultra3 standards. !" Auto-selection Multi-Mode SE or LVD termination for 9 signal line pairs. !" 5 V operation !" Built in thermal shutdown circuitry !" Supports Master/Slave input. !" SCSI bus hot-plug compatible. !" Supports active-negation drive.
VREF NC NC R1P R1N R2P R2N HGND HGND HGND R3P
www.DataSheet.net/
PACKAGE PIN OUT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19
TPWR HVD LVD SE R9N R9P R8N R8P HGND HGND HGND R7N R7P R6N R6P DIF_CAP DIFFSEN MST/SLV
DESCRIPTION
The SS7500 is a multimode SCSI terminator that conforms to the SCSI (SP2) specification which is designed for low voltage differential (LVD) termination. The SS7500 provides backward compatibility to the SCSI and SCSI-2 specifications. Multimode function sets up the use of legacy devices on the bus without changing any hardware setting. Automatic selection is made by voltage detection on the diffsense line. If the device is connected to an LVD-only bus, the SS7500 will use LVD termination. If the device is connected in a Single Ended mode, the SS7500 will be connected in a SE termination. The SCSI termination architecture uses high speed elements for the design, therefore providing fast response time.
R3N R4P R4N R5P R5N ISO
GND
SS7500
Rev.2.01 6/06/2003
www.SiliconStandard.com
1 of 5
Datasheet pdf - http://www.DataSheet4U.co.kr/
SS7500
PIN DESCRIPTIO...
Similar Datasheet