Digital to Analog Converter and Waveform Generator
Data Sheet
Low Power, 14-Bit, 180 MSPS, Digital-to-Analog Converter and Waveform Generator
AD9102
FEATURES
On-chip 409...
Description
Data Sheet
Low Power, 14-Bit, 180 MSPS, Digital-to-Analog Converter and Waveform Generator
AD9102
FEATURES
On-chip 4096 × 14-bit pattern memory On-chip DDS Power dissipation @ 3.3 V, 4 mA output
96.54 mW @ 180 MSPS Sleep mode: <5 mW @ 3.3 V Supply voltage: 1.8 V to 3.3 V SFDR to Nyquist
87 dBc @ 10 MHz output Phase noise @ 1 kHz offset, 180 MSPS, 8 mA: −150 dBc/Hz Differential current outputs: 8 mA max @ 3.3 V Small footprint, 32-lead, 5 mm × 5 mm LFCSP with 3.6 mm ×
3.6 mm exposed paddle, and Pb-free package
APPLICATIONS
Medical instrumentation Portable instrumentation
Signal generators, arbitrary waveform generators Automotive radar
GENERAL DESCRIPTION
The AD9102 TxDAC® and waveform generator is a high performance digital-to-analog converter (DAC) integrating on-chip pattern memory for complex waveform generation with a direct digital synthesizer (DDS).
The DDS is a 14-bit output, up to 180 MSPS master clock sine wave generator with a 24-bit tuning word, allowing 10.8 Hz/LSB frequency resolution.
SRAM data can include directly generated stored waveforms, amplitude modulation patterns applied to DDS outputs, or DDS frequency tuning words.
An internal pattern control state machine lets the user program the pattern period for the DAC as well the start delay within the pattern period for the signal output on the DAC .
A SPI interface is used to configure the digital waveform generator and load patterns into the SRAM.
A gain adjustment factor and an offset adjustment are appl...
Similar Datasheet