Wide Band Low Noise Amplifier GaAs MMIC
NJG1152KA1 Wide Band Low Noise Amplifier GaAs MMIC
I GENERAL DESCRIPTION The NJG1152KA1 is a fully matched wide band low...
Description
NJG1152KA1 Wide Band Low Noise Amplifier GaAs MMIC
I GENERAL DESCRIPTION The NJG1152KA1 is a fully matched wide band low noise amplifier GaAs MMIC for digital TV applications. To achieve wide dynamic range, the NJG1152KA1 offers high gain mode and low gain mode. Selecting high gain mode for weak signals, the NJG1152KA1 helps improve receiver sensitivity through high gain and low noise figure. Selecting low gain mode for strong signals, it bypasses LNA circuit to offer higher linearity. An small and ultra-thin package of FLP6-A1 is adopted. I PACKAGE OUTLINE
NJG1152KA1
I FEATURES G Operating frequency 40 to 900MHz G Package size FLP6-A1 (Package size: 1.6x1.6x0.55mm typ.) [ LNA mode, 50 ohm: Operating voltage 3.3V ] G Operating current 20mA typ. 18.0dB typ. G Small signal gain G Noise figure 1.2dB typ. @f=40 to 150MHz 0.9dB typ. @f=150 to 900MHz [ Bypass mode, 50 ohm: Operating voltage 0V ] G Insertion loss 1.0dB typ. G 2nd order intermodulation distortion 75dB typ. G 3rd order intermodulation distortion 85dB typ.
http://www.DataSheet4U.net/
I PIN CONFIGURATION (Top View)
4
RFIN
3
RFOUT2
5
GND Bias Circuit
2
GND
6
VCTL
Logic Circuit
1
RFOUT1
Pin connection 1. RFOUT1 2. GND 3. RFOUT2 4. RFIN 5. GND 6. VCTL
1pin Index
I TRUTH TABLE
VCTL H L
“H”=VCTL(H)“L”=VCTL(L)
LNA ON OFF Bypass OFF ON Mode select LNA mode Bypass mode
Note: Specifications and description listed in this datasheet are subject to change without notice.
Ver.2012-08-17
-1datasheet pdf - http://www.D...
Similar Datasheet