DatasheetsPDF.com

LED DRIVER. IS31FL3196 Datasheet

DatasheetsPDF.com

LED DRIVER. IS31FL3196 Datasheet






IS31FL3196 DRIVER. Datasheet pdf. Equivalent




IS31FL3196 DRIVER. Datasheet pdf. Equivalent





Part

IS31FL3196

Description

6-CHANNEL LIGHT EFFECT LED DRIVER



Feature


IS31FL3196 6-CHANNEL LIGHT EFFECT LED DR IVER April 2012 GENERAL DESCRIPTION IS3 1FL3196 is a 6-channel light effect LED driver which features two-dimensional auto breathing mode and an audio modula ted display mode. It has One Shot Progr amming mode and PWM Control mode for RG B lighting effects. The maximum output current can be adjusted in 8 levels (5m A~40mA). In PWM Co.
Manufacture

ISSI

Datasheet
Download IS31FL3196 Datasheet


ISSI IS31FL3196

IS31FL3196; ntrol mode, the PWM duty cycle of each o utput can be independently programmed a nd controlled in 256 steps to simplify color mixing. In One Shot Programming m ode, the timing characteristics for out put current - current rising, holding, falling and off time, can be adjusted i ndividually so that each output can ind ependently maintain a pre-established p attern achieving m.


ISSI IS31FL3196

ixing color breathing or a single color breathing without requiring any additio nal interface activity, thus saving val uable system resources. The IS31FL3196 includes an audio modulated display mod e, wherein the brightness of LED can be modulated by audio signal. There is a cascade pin for the synchronization of two chips. IS31FL3196 is available in Q FN-20 (3mm × 3mm)..


ISSI IS31FL3196

It operates from 2.7V to 5.5V over the temperature range of -40°C to +85°C. TYPICAL APPLICATION CIRCUIT http://www. DataSheet4U.net/ FEATURES 2. 7V to 5.5V supply voltage I2C interface Two groups RGB, single color LED breat hing system-free pre-established patter n 6 independently controlled automatic and semiautomatic breathing system-free pre-established pat.

Part

IS31FL3196

Description

6-CHANNEL LIGHT EFFECT LED DRIVER



Feature


IS31FL3196 6-CHANNEL LIGHT EFFECT LED DR IVER April 2012 GENERAL DESCRIPTION IS3 1FL3196 is a 6-channel light effect LED driver which features two-dimensional auto breathing mode and an audio modula ted display mode. It has One Shot Progr amming mode and PWM Control mode for RG B lighting effects. The maximum output current can be adjusted in 8 levels (5m A~40mA). In PWM Co.
Manufacture

ISSI

Datasheet
Download IS31FL3196 Datasheet




 IS31FL3196
IS31FL3196
6-CHANNEL LIGHT EFFECT LED DRIVER
GENERAL DESCRIPTION
IS31FL3196 is a 6-channel light effect LED driver
which features two-dimensional auto breathing mode
and an audio modulated display mode. It has One Shot
Programming mode and PWM Control mode for RGB
lighting effects. The maximum output current can be
adjusted in 8 levels (5mA~40mA).
In PWM Control mode, the PWM duty cycle of each
output can be independently programmed and
controlled in 256 steps to simplify color mixing. In One
Shot Programming mode, the timing characteristics for
output current - current rising, holding, falling and off
time, can be adjusted individually so that each output
can independently maintain a pre-established pattern
achieving mixing color breathing or a single color
breathing without requiring any additional interface
activity, thus saving valuable system resources.
The IS31FL3196 includes an audio modulated display
mode, wherein the brightness of LED can be
modulated by audio signal. There is a cascade pin for
the synchronization of two chips.
IS31FL3196 is available in QFN-20 (3mm × 3mm). It
operates from 2.7V to 5.5V over the temperature range
of -40°C to +85°C.
FEATURES
April 2012
2.7V to 5.5V supply voltage
I2C interface
Two groups RGB, single color LED breathing
system-free pre-established pattern
6 independently controlled automatic and
semiautomatic breathing system-free
pre-established pattern
6 independently controlled outputs of 256 PWM
steps
8 levels programmable output current
Audio mode with AGC function
Cascade for the synchronization of chips
Over-temperature protection
QFN-20 (3mm × 3mm) package
APPLICATIONS
Mobile phones and other hand-held devices for
LED display
LED in home appliances
TYPICAL APPLICATION CIRCUIT
http://www.DataSheet4U.net/
Figure 1 Typical Application Circuit
Note: The IC should be placed far away from the mobile antenna in order to prevent the EMI.
Integrated Silicon Solution, Inc. — www.issi.com
Rev.A, 03/27/2012
1
datasheet pdf - http://www.DataSheet4U.net/




 IS31FL3196
IS31FL3196
Figure 2 Typical Application Circuit (Cascade Mode)
http://www.DataSheet4U.net/
Copyright © 2011 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any 
time without notice. ISSI assumes no liability arising out of the application or use of any information, products or services described herein. Customers are 
advised to obtain the latest version of this device specification before relying on any published information and before placing orders for products. 
Integrated Silicon Solution, Inc. does not recommend the use of any of its products in life support applications where the failure or malfunction of the 
product can reasonably be expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not 
authorized for use in such applications unless Integrated Silicon Solution, Inc. receives written assurance to its satisfaction, that: 
a.) the risk of injury or damage has been minimized; 
b.) the user assume all such risks; and 
c.) potential liability of Integrated Silicon Solution, Inc is adequately protected under the circumstances
Integrated Silicon Solution, Inc. — www.issi.com
Rev.A, 03/27/2012
2
datasheet pdf - http://www.DataSheet4U.net/




 IS31FL3196
IS31FL3196
PIN CONFIGURATION
Package
Pin Configuration (Top View)
QFN-20
PIN DESCRIPTION
No. Pin
1
2
3~6
7
8, 9
10~12
13
14
VCC
C_FILT
OUT1~OUT4
GND
OUT5~OUT6
NC
SDB
I_AUD
15 R_EXT
16 AD
17 IN
18 SCL
19 SDA
20 CLK/V_BM
Thermal Pad
Description
Power supply.
Filter capacitor for audio control.
Current source outputs.
Ground.
Current source outputs.
http://www.DataSheet4U.net/
No connection.
Shutdown the chip when pulled to low.
Audio current input or output for cascade.
Input terminal used to connect an external resistor.
The value must be about 100k.
I2C address setting.
Audio input.
I2C serial clock.
I2C serial data.
CLK input or output for cascade.
When breathing mark function enable, this pin is
V_BM pin.
Connect to GND.
Integrated Silicon Solution, Inc. — www.issi.com
Rev.A, 03/27/2012
3
datasheet pdf - http://www.DataSheet4U.net/



Recommended third-party IS31FL3196 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)