LI+ DUAL BATTERY CONTROLLER
IS31PW8200
LI+ DUAL BATTERY CONTROLLER
GENERAL DESCRIPTION
The IS31PW8200 is a highly integrated IC to serve as the cont...
Description
IS31PW8200
LI+ DUAL BATTERY CONTROLLER
GENERAL DESCRIPTION
The IS31PW8200 is a highly integrated IC to serve as the control logic for a system with multiple power sources. It integrates a mini-charger’s path power MOS with a switchable bulk and saves the external diode in mini-charger path. Also, it directly drives the internal P-channel MOSFETs to select the power path for the system and manages dual battery sources for charge and discharge. The power path selection is made based on the present voltage of the power sources and the state of charge of the batteries.
Additionally, IS31PW8200 integrates an I2C block to communicate with the Base Band. At start up, the baseband reads out the status of the dual battery sources. During operation, if the status changes, IS31PW8200 provides an interrupt to notify the baseband to update the information of the dual battery sources.
IS31PW8200 is available in QFN-20 (3mm × 3mm) package. It operates from 2.4V to 5.5V over the temperature range of -40°C to +85°C.
December 2013
FEATURES
2.4V to 5.5V supply voltage I2C interface Complete power path management for dual
battery systems Dual battery status monitor Integrated charger path switches Hardware reset function Operating temperature TA = −40°C ~ 85°C QFN-20 (3mm × 3mm) package
APPLICATIONS
Cellular phones PDAs Portable electronics
TYPICAL APPLICATION CIRCUIT
Figure 1 Typical Application Circuit
Integrated Silicon Solution, Inc. – www.issi.com Rev. B, 12...
Similar Datasheet