DatasheetsPDF.com

Cable Connectors. XG2 Datasheet

DatasheetsPDF.com

Cable Connectors. XG2 Datasheet






XG2 Connectors. Datasheet pdf. Equivalent




XG2 Connectors. Datasheet pdf. Equivalent





Part

XG2

Description

Flat Cable Connectors



Feature


Flat Cable Connectors for PCBs XG2 Idea l for high-density mounting. IDC design allows for quick termination. • Part of a total flat cable wiring solution, when used in conjunction with XG4, XG5 and XG8 sockets and plugs. • End ter minates cable to a PCB or acts as a pas s through for connection to other cable s or PCB’s. • Uses a standard 2.54- mm grid terminal arrangeme.
Manufacture

Omron

Datasheet
Download XG2 Datasheet


Omron XG2

XG2; nt for easier design of circuits. • Te rminal Arrangement: standard or reverse . • Uses UL94V-0 approved insulation material. • IDC Assembly Tools are av ailable. XG2 Connectors ■ Terminal A rrangement The contact numbers are not marked on the Connector. If the cables are numbered from 1 starting from the e dge, the relationship between the wires and the terminals would b.


Omron XG2

e as shown below. Standard Terminal Arra ngement Cable No. Reverse Terminal Arr angement Cable No. http://www.DataSheet 4U.net/ Cable No. Cable number arrange ment (top view) Cable No. ■ Ratings and Characteristics Rated current Rate d voltage Contact resistance Dielectric strength Operating temperature 1A 250 VAC 15 mΩ max. (at 20 mV, 100 mA max.) 500 VAC for 1 min. (.


Omron XG2

leakage current: 1 mA max.) −55°C to 85°C (with no icing at low temperature ) ■ Materials and Finish Base Fiber- glass reinforced PBT resin (UL94V-0)/bl ack Terminals Cover Copper alloy/nickel base, tin plating Fiber-glass reinforc ed PBT resin (UL94V-0)/black Contacts M ating end Copper alloy/nickel base, tin plating Insulation resistance 1,000 M Ω min. (at 500 VDC) ■ A.

Part

XG2

Description

Flat Cable Connectors



Feature


Flat Cable Connectors for PCBs XG2 Idea l for high-density mounting. IDC design allows for quick termination. • Part of a total flat cable wiring solution, when used in conjunction with XG4, XG5 and XG8 sockets and plugs. • End ter minates cable to a PCB or acts as a pas s through for connection to other cable s or PCB’s. • Uses a standard 2.54- mm grid terminal arrangeme.
Manufacture

Omron

Datasheet
Download XG2 Datasheet




 XG2
Flat Cable Connectors for PCBs
XG2
Ideal for high-density mounting.
IDC design allows for quick termination.
• Part of a total flat cable wiring solution, when used in
conjunction with XG4, XG5 and XG8 sockets and plugs.
• End terminates cable to a PCB or acts as a pass through
for connection to other cables or PCB’s.
• Uses a standard 2.54-mm grid terminal arrangement for
easier design of circuits.
• Terminal Arrangement: standard or reverse.
• Uses UL94V-0 approved insulation material.
• IDC Assembly Tools are available.
XG2 Connectors
Terminal Arrangement
The contact numbers are not marked on the Connector. If the cables are numbered from 1 starting from the edge, the relationship between the
wires and the terminals would be as shown below.
Standard Terminal
Arrangement
Reverse Terminal
Arrangement
Cable No.
Cable No.
http://www.DataSheet4U.net/
Cable No.
Cable number arrangement (top view)
Ratings and Characteristics
Rated current
1A
Rated voltage
250 VAC
Contact resistance 15 mΩ max. (at 20 mV, 100 mA max.)
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength 500 VAC for 1 min. (leakage current: 1 mA
max.)
Operating
temperature
55°C to 85°C (with no icing at low
temperature)
Cable No.
Materials and Finish
Base
Fiber-glass reinforced PBT resin
(UL94V-0)/black
Contacts Mating end Copper alloy/nickel base, tin plating
Terminals Copper alloy/nickel base, tin plating
Cover
Fiber-glass reinforced PBT resin
(UL94V-0)/black
Applicable Wires
1.27-mm pitch, AWG28, 7-strand flat cable.
UL2651 (standard cable)
UL20012 (folding cable)
UL20028 (color-coded cable)
Flat Cable Connectors for PCBs XG2
61
datasheet pdf - http://www.DataSheet4U.net/




 XG2
Double-row PCB Bus Connectors
XG2A
Dimensions
Standard Terminal Arrangement: XG2A-@@01
Reverse Terminal Arrangement: XG2A-@@02
No. of Dimensions (mm)
contacts
A
B
10 17.9 10.16
14 22.9 15.24
16 25.5 17.78
20 30.6 22.86
26 38.2 30.46
30 43.3 35.56
34 48.3 40.64
40 56.0 48.26
50 68.7 60.96
60 81.4 73.66
64 86.4 78.74
Ordering Information
Appearance
Mounting holes (bottom view)
Standard terminal arrangement
Reverse terminal arrangement
0.8
+0.1
0
dia.
0.8
+0.1
0
dia.
Note: The cover is an open-end type.
http://www.DataSheet4U.net/
No. of contacts
10
14
16
20
26
30
34
40
50
60
64
Connectors with
standard terminal arrangement
XG2A-1001
XG2A-1401
XG2A-1601
XG2A-2001
XG2A-2601
XG2A-3001
XG2A-3401
XG2A-4001
XG2A-5001
XG2A-6001
XG2A-6401
Connectors with
reverse terminal arrangement
XG2A-1002
XG2A-1402
XG2A-1602
XG2A-2002
XG2A-2602
XG2A-3002
XG2A-3402
XG2A-4002
XG2A-5002
XG2A-6002
XG2A-6402
Precautions
Correct Use
Handling
There is no Strain Relief for the PCB Connector. Leave enough
slack to avoid tension on the cable.
Terminals can be press fit no matter which direction the base and
cover are facing.
See “XG@ - Assembly Tooling and Accessories” datasheet for infor-
mation on flat cable / connector assembly tools.
Automated Soldering Conditions (Jet Flow)
1. Soldering temperature: 250 ± 5°C
2. Continuous soldering time: Within 5 s
62 Flat Cable Connectors for PCBs XG2
datasheet pdf - http://www.DataSheet4U.net/




 XG2
Omron Electronic Components, LLC
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
Terms and Conditions of Sales
medical equipment, amusement machines, vehicles, safety equipment, and
I. GENERAL
1. Definitions: The words used herein are defined as follows.
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
(a) Terms: These terms and conditions
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
(b) Seller: Omron Electronic Components LLC and its subsidiaries
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
(c) Buyer: The buyer of Products, including any end user in section III through VI
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
(d) Products: Products and/or services of Seller
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
invoices, purchase orders and other documents, whether electronic or in writing, relating
SELLER.
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
purchase order or other documents which are inconsistent with, or in addition to, these
a programmable Product.
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
IV. WARRANTY AND LIMITATION
section III of these Terms.
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
II. SALES
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
the invoice. Buyer shall have no right to set off any amounts against the amount owing in 2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
respect of this invoice.
originally shipped with Buyer responsible for labor charges for removal or replacement
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
amount equal to the purchase price of the Product; provided that there shall be no
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
legal rate, whichever is less, on any balance not paid within the stated terms.
approved in writing by Seller before shipment.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
shall make remittance to Seller at the then current exchange rate most favorable to
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
during the period between the due date and the date remittance is actually made.
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
any government approvals regarding the importation or sale of the Products.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
7. Taxes: All taxes, duties and other governmental charges (other than general real
employees from and against all liabilities, losses, claims, costs and expenses (including
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
manufacture, production, sale, delivery, importation, consumption or use of the Products
omissions under these Terms or in any way with respect to the Products.
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
V. INFORMATION; ETC.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller, 1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
Seller reserves the right to stop shipments or require satisfactory security or payment in
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
advance. If Buyer fails to make payment or otherwise comply with these Terms or any http://www.DataSheet4U.net/ without the written permission of Seller. Buyer (at its own expense) shall indemnify and
related agreement, Seller may (without liability and in addition to other remedies) cancel
hold harmless Seller and defend or settle any action brought against Seller to the extent
any unshipped portion of Products sold hereunder and stop any Products in transit until
that it is based on a claim that any Product made to Buyer specifications infringed
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
intellectual property rights of another party.
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
accounts.
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
information and materials supplied by Seller to Buyer relating to the Products are
indemnifies Seller fully against all costs or expenses arising in connection therewith.
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
employees and strictly prevent disclosure to any third party.
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
3. Performance Data: Performance data is provided as a guide in determining suitability
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
and does not constitute a warranty. It may represent the result of Seller's test conditions,
delay in or lack of transportation or the requirements of any government authority.
and the users must correlate it to actual application requirements.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
4. Change In Specifications: Product specifications and descriptions may be changed at
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
any time based on improvements or other reasons. It is Seller’s practice to change part
stated in writing by Seller), at which point title to and all risk of loss of the Products
numbers when published ratings or features are changed, or when significant
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
engineering changes are made. However, some specifications of the Product may be
the Products until the full purchase price is paid by Buyer;
changed without any notice.
(b) Delivery and shipping dates are estimates only; and
5. Errors And Omissions: The information on Seller’s website or in other documentation
(c) Seller will package Products as it deems proper for protection against normal
has been carefully checked and is believed to be accurate; however, no responsibility is
handling and extra charges apply to special conditions.
assumed for clerical, typographical or proofreading errors or omissions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
occurring before delivery to the carrier or any claim related to pricing or other charges
regarding (a) export of the Products or information provided by Seller; (b) sale of
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
Products to forbidden or other proscribed persons or organizations; (c) disclosure to non-
III. PRECAUTIONS
citizens of regulated technology or information.
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
VI. MISCELLANEOUS
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE 1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
between Buyer and Seller shall operate as a waiver of rights by Seller.
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
dispute hereunder.
Buyer acknowledges that it alone has determined that the Products will meet their
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
requirements of the intended use in all cases. Buyer must know and observe all
relating to the Products, and no provision may be changed or waived unless in writing
prohibitions of use applicable to the Product/s.
signed by the parties.
2. Use with Attention: The followings are some examples of applications for which
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
particular attention must be given. This is not intended to be an exhaustive list of all
not invalidate any other provision.
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
Flat Cable Connectors for PCBs XG2
datasheet pdf - http://www.DataSheet4U.net/



Recommended third-party XG2 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)