2 Mbit 2.3-3.6V SPI Serial Flash
SST25PF020B
2 Mbit 2.3-3.6V SPI Serial Flash
Features
• Single Voltage Read and Write Operations - 2.3-3.6V • Serial Int...
Description
SST25PF020B
2 Mbit 2.3-3.6V SPI Serial Flash
Features
Single Voltage Read and Write Operations - 2.3-3.6V Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3 High Speed Clock Frequency - 80 MHz (2.7-3.6V operation) - 50 MHz (2.3-2.7V operation) Superior Reliability - Endurance: 100,000 Cycles (typical) - Greater than 100 years Data Retention Low Power Consumption: - Active Read Current: 10 mA (typical) - Standby Current: 5 µA (typical) Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 32 KByte overlay blocks - Uniform 64 KByte overlay blocks Fast Erase and Byte-Program: - Chip-Erase Time: 35 ms (typical) - Sector-/Block-Erase Time: 18 ms (typical) - Byte-Program Time: 7 µs (typical) Auto Address Increment (AAI) Programming - Decrease total chip programming time over Byte-Program operations End-of-Write Detection - Software polling the BUSY bit in Status Register - Busy Status readout on SO pin in AAI Mode Hold Pin (HOLD#) - Suspends a serial sequence to the memory without deselecting the device Write Protection (WP#) - Enables/Disables the Lock-Down function of the status register Software Write Protection - Write protection through Block-Protection bits in status register Temperature Range - Commercial: 0°C to +70°C Packages Available - 8-lead SOIC (150 mils) - 8-contact WSON (6mm x 5mm) - 8-contact USON (3mm x 2mm) All non-Pb (lead-free) devices are RoHS compliant
Product Description
The 25 series Serial Flash family ...
Similar Datasheet