MCP2025

MCP2025 LIN Transceiver with Voltage Regulator Features: Compliant with LIN Bus Specifications Version 1.3, 2.1 and with SAE J2602-2 Supports Baud Rates up to 20 kBaud 43V Load Dump Protected Maximum Continuous Input Voltage: 30V Wide LIN-Compliant Supply Voltage: 6.0-18.0V Extended Temperature Range: -40°C to +125°C Interface to PIC® EUSART and Standard USARTs Wake-Up on LIN Bus Activity or Local Wake Input Local Interconnect Network (LIN) Bus Pin: - Internal Pull-Up Termination Resistor and Diode for Slave Node - Protected Against VBAT Shorts - Protected Against Loss of Ground - High-Current Drive TXD and LIN Bus Dominant Time-Out Function Two Low-Power Modes: - Transmitter Off: 90 µA (typical) - Power Down: 4.5 µA (typical) MCP2025 On-Chip Voltage Regulator: - Output Voltage of 5.0V or 3.3V at 70 mA Capability with Tolerances of ±3% Over the Temperature Range - Internal Short-Circuit Current Limit - External Components Limited to Filter Capacitor and Load Capacitor Automatic Thermal Shutdown High Electromagnetic Immunity (EMI), Low Electromagnetic Emission (EME) Robust ESD Performance: ±15 kV for LBUS and VBB Pin (IEC61000-4-2) Transient Protection for LBUS and VBB pins in Automotive Environment (ISO7637) Meets Stringent Automotive Design Requirements, including “OEM Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications”, Version 1.3, May 2012 Multiple Package Options, Including Small 4x4 mm DFN Package D...