WR04

Walsin Technology Corporation WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors Size 1206, 0805, 0603, 0402 (Special Requirement) http://www.DataSheet4U.net/ Customer : Approval No : Issue Date : Customer Approval : Page 1 of 10 WR12/WR08/WR06/WR04 Version 1 Feb.-2008 datasheet pdf - http://www.DataSheet4U.net/ Walsin Technology Corporation FEATURE 1. High reliability and stability 2. Reduced size of final equipment 3. Lower assembly costs 4. Higher component and equipment reliability 5. Lead free products upon customer requested APPLICATION Consumer electrical equipment Automotive application EDP, Computer application Telecom application DESCRIPTION The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to within tolerance by laser cutting of this resistive layer. The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For ease of soldering the outer layer of these end terminations is a Lead-tin or Tin (lead free) alloy. http://www.DataSheet4U.net/ Fig 1. Consctruction of a Chip-R Page 2 of 10 WR12/WR08/WR06/WR04 Version 1 Feb.-2008 datasheet pdf - http://www.DataSheet4U.net/ Walsin Technology Corporation QUICK REFERENCE...