Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
SAM50F thru SAM90F and SAM50UF thru SAM90UF
0.5 Amp 5000-9000 VOLTS 60-150 nsec HIGH VOLTAGE RECTIFIER
FEATURES:
Fast Recovery: 60-150 nsec Maximum PIV to 9000 Volts Hermetically Sealed Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature TX, TXV, and Space Level Screening Available 2/
Designer’s Data Sheet
Part Number / Ordering Information 1/ SAM __
│ │ │ │ │ │ │ │ │ │
└
__
│ │ │ │ │ │ │
└
__ __
│ │ │ │
└ └ Screening
= None TX = TX Level TXV = TXV Level S = S Level
2/
Package
___ = Axial SMS = Surface Mount Square Tab
Recovery Time
F = Fast Recovery UF = Ultra Fast Recovery
Voltage
50 = 5000 60 = 6000 70 = 7000
80 = 8000 90 = 9000
ELECTRICAL CHARACTERISTICS (at 25°C unless otherwise specified)
Part Number Symbol Units Conditions Peak Inverse Voltage PIV V 25°C Average Rectifier Current IO mA 100°C @ PIV 25°C Maximum Reverse Current IR μA @ PIV 100°C Maximum Forward Voltage
http://www.DataSheet4U.net/
Maximum Surge Current (1 Cycle) IFSM A
Maximum Reverse Recovery Time tRR nsec IF= .5 A IR= 1 A IRR= .25 A
Maximum Junction Capacitance CJ pF VR= 100 V fT= 1 MHZ
Typical Thermal Resistance RθJL °C/W L=3/8” RθJE °C/W L=0”
VF V @ IO
SAM50F SAM60F SAM70F SAM80F SAM90F SAM50UF SAM60UF SAM70UF SAM80UF SAM90UF
5000 6000 7000 8000 9000 5000 6000 7000 8000 9000
500 500 500 500 500 400 400 400 400 400
300 300 300 300 300 250 250 250 250 250
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
15 15 15 15 15 15 15 15 15 15
13 13 13 13 13 14 14 14 14 14
25 25 25 25 25 25 25 25 25 25
150 150 150 150 150 60 60 60 60 60 Axial
10 10 10 10 10 10 10 10 10 10
21 21 21 21 21 21 21 21 21 21 SMS
12 12 12 12 12 12 12 12 12 12
1/ For Ordering Information, Price, and Availability – Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in a suitable dielectric material. 4/ Max. forward voltage measured with instantaneous forward pulse of 300µsec minimum. 5/ Max. end tab temp. for soldering is 250°C for 5 sec maximum. 6/ Operating and storage temperature: -65°C to +175°C.
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RV0031E
DOC
datasheet pdf - http://www.DataSheet4U.net/
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
SAM50F thru SAM90F and SAM50UF thru SAM90UF
DIMENSIONS DIM A B C D MIN ----.047” .400” DIMENSIONS DIM A B C D MIN .195” .330” .020” .002” MAX .205” .410” .035” --MAX .300” .425” .063” ---
PACKAGE OUTLINE:
Axial
Surface Mount Square Tab
http://www.DataSheet4U.net/
NOTE: All specifications are subject to change wi.