PVL225P

datasheet pdf - http://www.DataSheet4U.net/ photoelectric sensor Pick to Light receiver PVL225P s s s s s s s Scan field: 225 mm 4-beam system Max. distance to reflector 1.5 m Operating voltage: 12…30 VDC Protection class: IP50 Cable, 2 m PNP switching output Wiring diagram Type Ident-No. Design Dimensions Housing material Connection Cable length Cable Jacket Material Protection class Ambient temperature Operating voltage DC rated operational current Response time Light type PVL225P 3026207 rectangular 327.5x 31x 37.3 mm Aluminium, AL cable, 4-wire 2 m PVC IP65 -40…+70 °C 12…30VDC ð 140 mA < 2 ms red Functional principle The PVL sensor is a user-friendly one-piece light screen used for assembly, component picking and fault detection tasks. The PVL incorporates emitter and receiver. Together with the reflector, which is included in the delivery, the sensor operates in retroreflective mode. The operating modes need not be configured. The reflector is mounted opposite to the sensor. The automatic set-up routine makes manual adjustments redundant. The job light is triggered externally and is steady green during the assigned signal period. The integrated sensor reports "pick-up" back. Mispick is indicated by the job light flashing red. http://www.DataSheet4U.net/ Edition 2013-06-14T06:45:37+02:00 1/1 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com ...