EP82562ET

82562ET 10/100 Mbps Platform LAN Connect (PLC) Networking Silicon Datasheet Product Features ■ ■ ■ ■ ■ ■ ■ ■ IEEE 802.3 10BASE-T/100BASE-TX compliant physical layer interface IEEE 802.3u Auto-Negotiation support Digital Adaptive Equalization control Link status interrupt capability XOR tree mode support 3-port LED support (speed, link and activity) 10BASE-T auto-polarity correction LAN Connect Interface ■ ■ ■ ■ ■ ■ ■ Diagnostic loopback mode 1:1 transmit transformer ratio support Low power (less than 300 mW in active transmit mode) Reduced power in “unplugged mode” (less than 50 mW) Automatic detection of “unplugged mode” 3.3 V device 48-pin Shrink Small Outline Package Revision 1.4 November 2006 Free Datasheet http://www.datasheet4u.com/ Revision History Revision 0.55 0.6 Revision Date Sept. 1999 Nov. 1999 Initial release. Corrected Figure 4 “NRZ to MLT-3 Encoding Diagram on Pg. 11 to reflect correct signal transitions. Removed “10BASE-T Error Detection and Reporting” section since the 82562 does not do 10BASE-T error reporting. Updated bit 13 of Table 3 “Register 16 (10 Hexadecimal): PLC Status, Control and Address Data” to reflect correct values. Advance Information Datasheet release (Intel Secret). Modified Table 1 “82562ET Hardware Configuration” to add one row for XOR Tree and include column for comments. Updated the descrition of the Activity LED signal in Section 3.6, “LED Pins”. Revised Section 3.7, “Miscellaneous Control Pins” to reflect referenc...