VDMR10A1, VDMO10A1, VDMY10A1, VDMG10A1
www.vishay.com
Vishay Semiconductors
Standard 7-Segment SMD Display 10 mm
FEATURES
• Evenly lighted segments • Grey package surface • Untinted segments • Luminous intensity categorized • Yellow, green, and soft orange categorized for color • Wide viewing angle • Suitable for DC and high peak current
DESCRIPTION
The VDM.10A1 series are 10 mm SMD seven segment LED displays in a very compact package. The devices utilize AlInGaP on GaAs chip technology.
• Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
APPLICATIONS
• Panel meters • Test- and measure-equipment • Point-of-sale terminals • Control units
PRODUCT GROUP AND PACKAGE DATA
• Product group: Display • Package: 10 mm • Product series: SMD • Angle of half intensity: ± 50°
PARTS TABLE
PART VDMR10A1 VDMO10A1 VDMY10A1 VDMG10A1 COLOR Super red Soft orange Yellow Green LUMINOUS INTENSITY (μcd) MIN. 450 180 450 110 TYP. 1600 650 1600 500 MAX. WAVELENGTH at at FORWARD VOLTAGE at (nm) (V) IF IF IF (mA) MIN. TYP. MAX. (mA) MIN. TYP. MAX. (mA) 1 1 1 1 631 605 587 572 20 20 20 20 2.0 2.0 2.0 2.0 2.6 2.6 2.6 2.6 20 20 20 20 CIRCUITRY Common anode Common anode Common anode Common anode
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VDMR10A1, VDMO10A1, VDMY10A1, VDMG10A1
PARAMETER Power dissipation per segment Peak forward current per segment (frequency 1 kHz, 10 % duty cycle) Continous forward current per segment Forward current derating from 25 °C Operating temperature range Storage temperature range Iron soldering conditions: 1/16" below seating plane for 3 s at 260 °C Tamb Tstg TEST CONDITION SYMBOL PV IF IF VALUE 70 60 25 0.28 - 35 to + 105 - 35 to + 105 UNIT mW mA mA mA/°C °C °C
Rev. 1.0, 13-May-13
Document Number: 84197 1 For technical questions, contact:
[email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Free Datasheet http://www.datasheet4u.com/
VDMR10A1, VDMO10A1, VDMY10A1, VDMG10A1
www.vishay.com
Vishay Semiconductors
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VDMR10A1, SUPER RED
PARAMETER Luminous intensity (1) Dominant wavelength Peak emmision wavelength Spectral line half-width Forward voltage per segment Reverse current per segment (2) Luminous intensity matching ratio TEST CONDITION IF = 1 mA IF = 10 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA VR = 5 V IF = 10 mA VDMR10A1 PART VDMR10A1 VDMR10A1 SYMBOL IV IV d p VF IR Iv-m MIN. 450 TYP. 1600 20 800 631 639 20 2.0 MAX. 2.6 100 2:1 V μA UNIT μcd μcd nm nm
Notes (1) Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. (2) Reverse voltage is only for IR test.It can not continue to operate at this situation. (3) Cross talk specification ≤ 2.5 %.
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VDMO10A1, SOFT ORANGE
PARAMETER Luminous intensity (1) Dominant wavelength Peak emmision wavelength Spectral line half-width Forward voltage per segment Reverse current per segment (2) Luminous intensity matching ratio TEST CONDITION IF = 1 mA IF = 10 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA VR = 5 V IF = 10 mA VDMO10A1 PART VDMO10A1 VDMO10A1 SYMBOL IV IV d p VF IR Iv-m MIN. 180 TYP. 650 8250 605 611 17 2.0 MAX. 2.6 100 2:1 V μA UNIT μcd μcd nm nm
Notes (1) Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. (2) Reverse voltage is only for IR test.It can not continue to operate at this situation. (3) Cross talk specification ≤ 2.5 %.
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VDMY10A1, YELLOW
PARAMETER Luminous intensity (1) Dominant wavelength Peak emmision wavelength Spectral line half-width Forward voltage per segment Reverse current per segment (2) Luminous intensity matching ratio TEST CONDITION IF = 1 mA IF = 10 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA VR = 5 V IF = 10 mA VDMY10A1 PART VDMY10A1 VDMY10A1 SYMBOL IV IV d p VF IR Iv-m MIN. 450 TYP. 1600 17 600 587 588 15 2.0 MAX. 2.6 100 2:1 V μA UNIT μcd μcd nm nm
Notes (1) Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. (2) Reverse voltage is only for IR test.It can not continue to operate at this situation. (3) Cross talk specification ≤ 2.5 %.
Rev. 1.0, 13-May-13
Document Number: 84197 2 For technical questions, contact:
[email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VDMR10A1, VDMO10A1, VDMY10A1, VDMG10A1
www.vishay.com
Vishay Semiconductors
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specifie.