DatasheetsPDF.com

1N6282A Dataheets PDF



Part Number 1N6282A
Manufacturers Taiwan Semiconductor
Logo Taiwan Semiconductor
Description (1N6267 - 1N6303A) Transient Voltage Suppressor Diodes
Datasheet 1N6282A Datasheet1N6282A Datasheet (PDF)

1.5KE SERIES Transient Voltage Suppressor Diodes Voltage Range 6.8 to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State Features UL Recognized File # E-96005 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Exceeds environmental standards of MIL-STD-19500 1500W surge capability at 10 x 100 us waveform, duty cycle: 0.01% Excellent clamping capability Low zener impedance Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 .

  1N6282A   1N6282A



Document
1.5KE SERIES Transient Voltage Suppressor Diodes Voltage Range 6.8 to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State Features UL Recognized File # E-96005 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Exceeds environmental standards of MIL-STD-19500 1500W surge capability at 10 x 100 us waveform, duty cycle: 0.01% Excellent clamping capability Low zener impedance Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns for bidirectional Typical IR less than 1uA above 10V High temperature soldering guaranteed: 260°C / 10 seconds / .375”,(9.5mm) lead length / 5lbs.,(2.3kg) tension DO-201 Mechanical Data Case: Molded plastic Lead: Axial leads, solderable per MIL-STD-202, Lead: Method 208 Polarity: Color band denotes cathode except bipolar Weight: 0.94gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Peak Power Dissipation at TA=25 C, Tp=1ms (Note 1) O Symbol PPK PD IFSM VF TJ, TSTG Value Minimum1500 5.0 200 3.5 / 5.0 -55 to + 175 O Units Watts Watts Amps Volts °C Steady State Power Dissipation at TL=75 °C Lead Lengths .375”, 9.5mm (Note 2) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3) Maximum Instantaneous Forward Voltage at 50.0A for Unidirectional Only (Note 4) Operating and Storage Temperature Range Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25 C Per Fig. 2. Notes: 2. Mounted on Copper Pad Area of 0.8 x 0.8” (20 x 20 mm) Per Fig. 4. Notes: 3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minutes Notes: 3. Maximum. Notes: 4. VF=3.5V for Devices of VBR ≤ 200V and VF=5.0V Max. for Devices VBR>200V. Devices for Bipolar Applications Notes: 1. For Bidirectional Use C or CA Suffix for Types 1.5KE6.8 through Types 1.5KE440. Notes: 2. Electrical Characteristics Apply in Both Directions. - 576 Free Datasheet http://www.datasheet4u.com/ RATINGS AND CHARACTERISTIC CURVES (1.5KE SERIES) FIG.1- PEAK PULSE POWER RATING CURVE PEAK PULSE POWER (Ppp) or CURRENT (IPPM) DERATING IN PERCENTAGE, % 100 100 FIG.2- PULSE DERATING CURVE PPPM, PEAK PULSE POWER, KW NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 TA=250C 10 75 50 1.0 25 0.1 0.1ms 1ms 10ms 100ms 1.0ms 10ms 0 0 25 50 75 100 125 o 150 175 200 tp, PULSE WIDTH, sec. TA, AMBIENT TEMPERATURE, C FIG.3- PULSE WAVEFORM tr=10msec. PEAK VALUE lPPM PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of lPPM PM(AV), STEADY STATE POWER DISSIPATION, WATTS FIG.4- STEADY STATE POWER DERATING CURVE 5.0 150 PEAK PULSE CURRENT - % 60Hz RESISTIVE OR INDUCTIVE LOAD 100 L=0.375"(9.5mm) LEAD LENGTHS 50 HALF VALUE- lPPM 2 10/1000 sec. WAVEFORM as DEFIN.


1N6282 1N6282A 1N6283


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)