Ultrasound Damper
HV7370 Quad, High Speed, ±100V 850mA, Ultrasound Damper
Features
► ► ► ► ► ► ► HVCMOS® technology for high performance H...
Description
HV7370 Quad, High Speed, ±100V 850mA, Ultrasound Damper
Features
► ► ► ► ► ► ► HVCMOS® technology for high performance High density integration ultrasound transmitter 0 to ±100V open-drain voltage ±850mA source and sink current Up to 20MHz operation frequency Matched delay times 1.8 to 5V CMOS logic interface
General Description
The Supertex HV7370 is a four-channel, monolithic high voltage, high-speed damper. It is designed for working with the HV738, HV748 or HV758 for medical ultrasound waveform generators requiring fast return-to-zero applications. The HV7370 consists of a controller logic interface circuit, level translators, MOSFET gate drives and high current power Pchannel and N-channel MOSFETs as the output stage for each channel. The output stages of each channel are designed to provide peak output currents of over ±0.85A for damping to ground, with up to ±100V swing. The control from inputs to outputs uses direct coupling topology, which not only saves components and PCB layout space, but also makes the damping frequency function down to DC.
Applications
► ► ► ► Medical ultrasound imaging Piezoelectric transducer drivers NDT ultrasound transmission Pulse waveform generator
Block Diagram
+1.8 to 3.3V
+9.0V
+75V
VPP -9.0V
0 to +75V
C1 VLL OTP EN MC0 MC1 PIN1 (+Pulse) NIN1 (-Pulse)
EN_PWR
C2 VDD
C3 VSUB
SUB
C4 VPF VPP
C5
RGND RP1 P-Driver TXP1 D1 D2
Level Trans.
Level Trans.
Pulser
N-Driver RN1 Supertex HV748
1 of 4 Channels
TXN1 RGND
HVOUT1
GREF +...
Similar Datasheet