PM25LV016B

ADVANCED INFORMATION Pm25LV080B / 016B 8 Mbit / 16 Mbit Single Operation Voltage Serial Flash Memory With 100 MHz SPI Bus Interface FEATURES Single Power Supply Operation - Low voltage range: 2.7 V - 3.6 V Memory Organization - Pm25LV080B: 1M x 8 (8 Mbit) - Pm25LV016B: 2M x 8 (16 Mbit) Cost Effective Sector/Block Architecture - 8Mb : Uniform 4Kbyte sectors / Sixteen uniform 64Kbyte blocks - 16Mb : Uniform 4Kbyte sectors / Thirty-two uniform 64Kbyte blocks - Bottom sector is configurable as one 4Kbyte sector or four 1Kbyte sectors Serial Peripheral Interface (SPI) Compatible - Supports SPI Modes 0 (0,0) and 3 (1,1) - Maximum 33 MHz clock rate for normal read - Maximum 100 MHz clock rate for fast read Page Program (up to 256 Bytes) Operation - Typical 2 ms per page program Sector, Block or Chip Erase Operation - Typical 40 ms sector, block or chip erase Software Write Protection - The Block Protect (BP2, BP1, BP0) bits allow partial or entire memory to be configured as read-only Hardware Write Protection - Protect and unprotect the device from write operation by Write Protect (WP#) Pin Low Power Consumption - Typical 10 mA active read current - Typical 15 mA program/erase current High Product Endurance - Guarantee 100,000 program/erase cycles per single sector - Minimum 20 years data retention Industrial Standard Pin-out and Package - 8-pin 208mil SOIC - 8-contact WSON - Optional lead-free (Pb-free) package GENERAL DESCRIPTION The Pm25LV080B/016B are 8 Mb...