LCL0912-L

MCM LNA Product Features LCL0912-L / LCL1512-L LCL1812-L Applications 2G & 3G Repeater Base Station PCS, CDMA, W-CDMA GSM, DCS, UMTS WiMAX, Wibro, WLAN RF Sub-Systems Package : CP-16B Multichip Hybrid Module GaAs p-HEMT & MESFET chip on board No matching circuit needed High IP3 & Low Noise Single Supply Voltage (+5V) Surface Mount Hybrid Type Tape & Reel Packaging Small Size, High Heatsink Alumina Substrate Pb Free / RoHS Standard Descriptions RFHIC’s LOW Noise Amplifier series are all hybrid LNA type products which includes all matching for the convenience of customers. LCL series are focused on higher OIP3 while maintaining low noise. The structure of the device is built with GaAs pHEMT die attached on a ceramic thick film substrate. The device is still smaller than the area one would use for the application notes all together. Depending on the part number, one can use this in different frequency applications. All LNA hybrids are possible to have custom frequency & spec without any additional NRE cost involved. All RFHIC products are RoHS compliant. Electrical Specifications Parameter Frequency Range Small Signal Gain (S21) Gain Flatness Input Return Loss (S11) Output Return Loss (S22) 1dB Compression Point (P1dB) Output 3rd Order Intercept Point (OIP3) (TYP.) Noise Figure (TYP.) DC Supply Current (Vdc=+5V) Units MHz dB dB dB dB dBm dBm dB mA LCL0912-L 824~894 (Cellular) 35 ±0.5 -20 -18 21 42 0.8 180~240 890~960 (GSM) 34.5 ±0.5 -20 -15 21...